Re: Executing Squid ... but ...

        attached herewith is my squid.conf. i am new to squid ...
        any help from you guys would be appreciated.
        
        thanks in advance....

On Mon, 25 Nov 1996, Serge A. Krashakov wrote:
> Your squid is misconfigured. It seems like you are using squid in accelerated
> mode and simultaneously having httpd at the same port 80.
>
> See carefully on your squid.conf or send it to me, please.
>
> Serge Krashakov
>

# Generated automatically from squid.conf.pre.in by configure.
#
# $Id: squid.conf.pre.in,v 1.18.4.24 1996/11/02 00:22:55 wessels Exp $
#

# TAG: http_port
# The port number where squid will listen for HTTP client
# requests. Default is 3128, for httpd-accel mode use port 80.
# May be overridden with -a on the command line.
#http_port 3128
http_port 80

# TAG: icp_port
# The port number where squid send and receive ICP requests to
# and from neighbor caches. Default is 3130. To disable use
# "0". May be overridden with -u on the command line.
#icp_port 3130
icp_port 3130

# TAG: mcast_groups
# This tag specifies a list of multicast groups which your
# server should join to receive multicasted ICP requests.
#
# Usage: mcast_groups 239.128.16.128 224.0.1.20
#
# By default, squid doesn't listen on any multicast groups.
# You must #define USE_MULTICAST when compiling to enable this feature
#
#mcast_groups 239.128.16.128

# TAG: tcp_incoming_address
# TAG: tcp_outgoing_address
# TAG: udp_incoming_address
# TAG: udp_outgoing_address
#
# Usage: tcp_incoming_address 10.20.30.40
# udp_outgoing_address fully.qualified.domain.name
#
# These tags have replaced 'bind_address' and 'outbound_address'
# to provide more control for multihomed hosts.
#
# tcp_incoming_address is used for the HTTP socket which accepts
# connections from clients and other caches.
# tcp_outgoing_address is used for connections made to remote
# servers and other caches.
# udp_incoming_address is used for the ICP socket receiving packets
# from other caches.
# udp_outgoing_address is used for ICP packets sent out to other
# caches.
#
# The defaults behaviour is to not bind to any specific address.
#
# NOTE, udp_incoming_address and udp_outgoing_address can not have
# the same value since they both use port 3130.
#
#tcp_incoming_address 0.0.0.0
#tcp_outgoing_address 0.0.0.0
#udp_incoming_address 0.0.0.0
#udp_outgoing_address 0.0.0.0


# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
#-----------------------------------------------------------------------------

# TAG: cache_host
# To specify other caches in a hierarchy, use the format:
#
# hostname type http_port icp_port
#
# For example,
#
# # proxy icp
# # hostname type port port options
# # -------------------- -------- ----- ----- -----------
# cache_host bigserver.usc.edu parent 3128 3130 [proxy-only]
# cache_host littleguy1.usc.edu sibling 3128 3130 [proxy-only]
# cache_host littleguy1.usc.edu sibling 3128 3130 [proxy-only]
#
# type: either 'parent' or 'sibling'.
#
# proxy_port: The port number where the cache listens for proxy
# requests.
#
# icp_port: Used for querying neighbor caches about
# objects. To have a non-ICP parent
# specify '7' for the ICP port and make sure the
# parent machine has the UDP echo port
# enabled in its /etc/inetd.conf file.
#
# options: use 'proxy-only' to specify that objects fetched
# from this cache should not be saved locally.
#
# use 'weight=n' to specify a weighted parent.
# The weight must be an integer. The default weight
# is 1, larger weights are favored more.
#
# use 'ttl=n' to specify a IP multicast TTL to use
# when sending an ICP request to this address.
# Only useful when sending to a multicast group.
#
# multicast groups are treated like regular parents and
# neighbo[u]rs, except that we don't expect to see any
# replies from them.
#
#cache_host hostname type 3128 3130

# TAG: cache_host_domain
# Use to limit the domains for which a neighbor cache
# will be queried. Usage:
#
# cache_host_domain cache-host domain [domain ...]
# cache_host_domain cache-host !domain
#
# For example, specifying
#
# cache_host_domain bigserver.usc.edu .edu
#
# has the effect such that UDP query packets are sent to
# 'bigserver' only when the requested object exists on a
# server in the .edu domain. Prefixing the domainname
# with '!' means that the cache will be queried for objects
# NOT in that domain.
#
# NOTE: * Any number of domains may be given for a cache-host,
# either on the same or separate lines.
# * When multiple domains are given for a particular
# cache-host, the first matched domain is applied.
# * Cache hosts with no domain restrictions are queried
# for all requests.
# * There are no defaults.
# * There is also a 'cache_host_acl' tag in the ACL
# section.

# TAG: inside_firewall
# This tag specifies a list of domains inside your Internet
# firewall.
#
# Usage: inside_firewall my.domain [ my.other.domain ...]
#
# The use of this tag affects the server selection algorithm in
# two ways. Objects which do not match any of the listed domains
# will be considered "beyond the firewall." For these:"
# - There will be no DNS lookups for the URL-host.
# - The object will always be fetched from one of
# the parent or sibling caches.
#
# As a special case you may specify the domain as 'none' to force
# all requests to be fetched from neghbors and parents.
#
#inside_firewall topsecret.com

# TAG: local_domain
# This tag specifies a list of domains local to your organization.
#
# Usage: local_domain my.domain [ my.other.domain ...]
#
# For URLs which are in one of the local domains, the object
# is always fetched directly from the source and never from a
# sibling or parent.
#
#local_domain bigbucks.com
local_domain ph.net

# TAG: local_ip
# This tag specifies a list of network addresses local to your
# organization.
#
# Usage: local_ip ip-address
#
# This tag is similar to local_domain, except that the IP-address
# of the URL-host is checked. This requires that a DNS lookup
# be done on the URL-host. For this reason, local_domain is
# preferred over local_ip. By using local_domain it may be
# possible to avoid the DNS lookup altogether and deliver the
# object with less delay.
#
#local_ip 10.0.0.0
local_ip 165.220.0.0
#local_ip 172.16.0.0

# TAG: firewall_ip
#
# Just like 'inside_firewall' but for IP addresses. NOTE:
# firewall_ip and local_ip are mutually exclusive. If you
# use firewall_ip then local_ip will be ignored.
#
#firewall_ip 10.0.0.0
#firewall_ip 172.16.0.0

# TAG: single_parent_bypass
# This tag specifies that it is okay to bypass the hierarchy
# "Pinging" when there is only a single parent for a given URL.
#
# Usage: single_parent_bypass on|off
#
# Before actually sending ICP "ping" packets to neighbors, we
# figure out which hosts would be pinged based on the
# cache_host_domain rules, etc. Often it may be the case that
# only a single parent cache would be pinged.
#
# Since there is only a single parent, there is a very good
# chance that we will end up fetching the object from that
# parent. For this reason, it may be beneficial to avoid
# the ping and just fetch the object anyway.
#
# However, if we avoid the ping, we will be assuming that the
# parent host is reachable and that the cache process is running.
# By using the ping, we can be reasonably sure that the parent
# host will be able to handle our request. If the ping fails then
# it may be possible to fetch the object directly from the source.
#
# To favor the resiliency provided by the ping algorithm,
# single_parent_bypass is 'off' by default.
#
#single_parent_bypass off
single_parent_bypass on

# TAG: source_ping
# If source_ping is enabled, then squid will include the source
# provider site in its selection algorithm. This is accomplished
# by sending ICP "HIT" packets to the UDP echo port of the source
# host. Note that using source_ping may send a fair amount of UDP
# traffic out on the Internet and may irritate paranoid network
# administrators.
#
# Note that source_ping is incompatible with inside_firewall.
# For hosts beyond the firewall, source_ping packets will never
# be sent.
#
# By default, source_ping is off.
#
#source_ping off
source_ping off

# TAG: neighbor_timeout (seconds)
# This controls how long to wait for replies from neighbor caches.
# If none of the parent or neighbor caches reply before this many
# seconds (due to dropped packets or slow links), then the object
# request will be satisfied from the default source. The default
# timeout is two seconds.
#
#neighbor_timeout 2
neighbor_timeout 2

# TAG: hierarchy_stoplist
# A list of words which, if found in a URL, cause the object to
# be handled directly by this cache. In other words, use this
# to not query neighbor caches for certain objects. You may
# list this option multiple times.
#
# NOTE: this option will partially replace 'http_stop' etc, in a
# future release.
#
#hierarchy_stoplist
hierarchy_stoplist

# OPTIONS WHICH AFFECT THE CACHE SIZE
#-----------------------------------------------------------------------------

#
# TAG: cache_mem (in megabytes)
# Maximum amout of virtual memory used to cache particularly hot
# objects. Note the cache VM images will grow larger than this
# limit because other data are stored in VM besides just hot
# objects. The default is 16 MB.
#
#cache_mem 16
cache_mem 16

# TAG: cache_swap (in megabytes)
# Maximum about of disk space used by the cache. The default is
# 100 megabytes. When the disk usage gets to this size, the cache
# uses LRU replacement to evict objects as new objects are cached.
# Note that cache_swap is set to:
# max(cache_mem, cache_swap_specified)
# to guard against users' accidentally specifying a smaller
# cache_swap than cache_mem size.
#
#cache_swap 100
cache_swap 100

# TAG: cache_swap_low (percent, 0-100)
# TAG: cache_swap_high (percent, 0-100)
# The low- and high-water marks for cache LRU replacement.
# LRU replacement begins when the high-water mark is reached
# and ends when enough objects have been removed and the low-water
# mark is reached. Defaults are 75% and 90%.
#
cache_swap_low 75
cache_swap_high 90

# TAG: cache_mem_low (in percent)
# TAG: cache_mem_high (in percent)
# The low- and high-water mark for cache memory storage. When
# the amount of RAM used by the hot-object RAM cache reaches this
# point, the cache starts throwing objects out of the RAM cache
# (but they remain on disk). Defaults are 75% and 90%.
#
cache_mem_low 75
cache_mem_high 90


# LOGFILE PATHNAMES AND CACHE DIRECTORIES
#-----------------------------------------------------------------------------

# TAG: cache_dir
# Directory for on-disk cache storage. The cache will change into
# this directory when running. The default is
# /usr/local/squid/cache.
#
# You can specify multiple cache_dir lines to spread the
# cache among different disk partitions.
#cache_dir /usr/local/squid/cache
cache_dir /usr/local/squid/cache

# TAG: cache_access_log
# Logs the client request activity. Contains an entry for
# every HTTP and ICP request received.
#cache_access_log /usr/local/squid/logs/access.log
cache_access_log /usr/local/squid/logs/access.log

# TAG: cache_log
# Cache logging file. Set logging levels with "debug_options" below.
#cache_log /usr/local/squid/logs/cache.log
cache_log /usr/local/squid/logs/cache.log

# TAG: cache_hierarchy_log
# Hierachical caching access logfile. It shows which parent,
# neighbor, or source host a request is satisfied from.
# To disable, enter "none".
#cache_hierarchy_log /usr/local/squid/logs/hierarchy.log
cache_hierarchy_log /usr/local/squid/logs/hierarchy.log

# TAG: cache_store_log
# Logs the activities of the storage manager. Shows which
# objects are ejected from the cache, and which objects are
# saved and for how long. To disable, enter "none".
#cache_store_log /usr/local/squid/logs/store.log
cache_store_log /usr/local/squid/logs/store.log

# TAG: emulate_httpd_log
# The Cache can emulate the log file format which many 'httpd'
# programs use. To disable/enable this emulation, set
# emulate_httpd_log to 'off' or 'on'. The default
# is to enable this emulation.
#
#emulate_httpd_log on
emulate_httpd_log on

# TAG: pid_filename
# A pathname to write the process-id to. There is no default.
#pid_filename /tmp/squid.pid
pid_filename /tmp/squid.pid

# TAG: debug_options
# Logging options are set as section,level where each source file
# is assigned a unique section. Lower levels result in less
# output, Full debugging (level 9) can result in a very large
# log file, so be careful. The magic word "ALL" sets debugging
# levels for all sections. We recommend normally running with
# "ALL,1".
#debug_options ALL,1
debug_options ALL,1


# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
#-----------------------------------------------------------------------------

# TAG: cache_ftp_program
# Where to find the 'ftpget' program that retrieves FTP data (HTTP
# and Gopher protocol support are built into the cache).
#
cache_ftp_program /usr/local/squid/bin/ftpget

# TAG: cache_ftp_options
# Options for the 'ftpget' program. Please run 'ftpget' without
# any arguments to see a list of options. The default is
# no options. An example is
#
# cache_ftp_options -n 60 -R -W
#
#cache_ftp_options
#cache_ftp_options

# If you want the anonymous login password to be more informative
# (and enable the use of picky ftp servers), set this to something
# resonable for your domain, like wwwuser@somewhere.net
#
# The reason why this is domainless by default is that the
# request can be made on the behalf of a user in any domain.
# depending on how the cache is used.
# Some ftp server also validate that the email adress is valid
# (for example perl.com).
#
#ftp_user squid@

# TAG: cache_dns_program
# Specify the location of the executable for dnslookup process.
#
#cache_dns_program /usr/local/squid/bin/dnsserver
cache_dns_program /usr/local/squid/bin/dnsserver

# TAG: dns_children
# The number of processes spawn to service DNS name lookups.
# For heavily loaded caches on large servers, you should
# probably increase this value to at least 10. The maximum
# is 32. The default is 5.
#
#dns_children 5
dns_children 5


# OPTIONS FOR TUNING THE CACHE
#-----------------------------------------------------------------------------

# TAG: http_stop, gopher_stop, ftp_stop
# Stoplist for URL's. URL's which contain these strings will be
# never be saved in the cache.
#
# NOTE: these options will be removed in a future release, their
# functionality will be more appropriately provided by 'ttl_pattern'
# and 'hierarchy_stoplist'.
#
http_stop /cgi-bin/
http_stop ?
gopher_stop ?

# TAG: ftp, gopher, http
# Object size limits (in MB) and default TTLs (in minutes)
# per access type.
#
# You cannot have a max object size that is greater than
# cache_mem. We recommend that max object sizes are no greater
# than (cache_mem / 4).
#
# Objects greater than max-obj-size will be proxied, but not
# cached.
#
# The defaults are:
#
# Access Type Max Object Size TTL (note: 4320 minutes = 3 days)
# --------- ---------------- -----------
#gopher 4 4320
http 4 4320
#ftp 4 4320

# TAG: wais_relay
# Relay WAIS request to host (1st arg) at port (2 arg).
# Third argument is max object size.
#wais_relay localhost 8000 4

# TAG: request_size
# Maximum allowed request size in kilobytes. If people are using
# POST to upload files, then set this to the largest acceptable
# filesize plus a few extra kbytes.
#
request_size 100

# TAG: ttl_pattern # case sensitive
# TAG: ttl_pattern/i # case insensitive
# Selection of TTL's based on URL regular expressions (syntax
# is the POSIX standard). There are no defaults. Regular
# expressions are case-sensitive with 'ttl_pattern' and
# case-insensitive with 'ttl_pattern/i'.
#
# The list of URL patterns are searched in the order listed here.
# All patterns in the list are checked and the last match is used.
# There are two ways to specify the TTL: an absolute value, and
# as a percentage of the object's age.
#
# The percentage factor is listed last on the line and may be
# omitted. If the value is positive (non-zero) and the object
# metadata includes a last-modified timestamp, the TTL will be set as
# the given percent of the difference between current time and
# the last-modified time. The number following the percentage
# is an upper limit on the TTL. The default is 43200 minutes, or
# 30 days. This means that no object whose TTL is set by this
# method will remain in the cache for longer than 30 days.
#
# If the percentage factor is not used (for example when an object
# has no last-modified timestamp) the absolute TTL value will
# be checked instead. If the absolute value is non-negative,
# it will be used.
#
# A negative absolute TTL value in conjunction with a positive
# percentage factor has the effect that the TTL is set from
# the pattern match only if a last-modified timestamp is present.
#
# If neither the absolute TTL or percentage factor result in a
# TTL for the object, the default TTL from the preceeding section
# will be used.
#
# The following line represents the default behaviour. Objects with
# Last-Modified time are cached for 20% of their age, up to three
# days. Otherwise, an object will be cached for three days
# by default.
#
# ttl_pattern . 4320 20% 4320
#
# Examples:
#
# Calculate TTL as
# Absolute this percentage of
# Regular Expression TTL in the object's age
# matching URLs minutes %age Max (minutes)
# --------- --------------------- ----------- ------ ------------
ttl_pattern ^http:// 1440 20% 43200
ttl_pattern ^ftp:// 10080 20% 43200
ttl_pattern/i \.gif$ 2880 50% 43200
ttl_pattern /cgi-bin/ 0 0% 43200


# TAG: quick_abort
# By default the cache continues to retrieve objects from
# aborted requests. This may be undesirable on slow (e.g. SLIP)
# links and/or very busy caches. Impatient users may tie up
# file descriptors by repeatedly aborting and re-requesting
# non-cachable objects.
#
#quick_abort off
quick_abort on

# TAG: negative_ttl (in minutes)
# Time-to-Live (TTL) for failed requests. Certain types of
# failures (such as "connection refused" and "404 Not Found") are
# negatively-cached for a small amount of time. The default is 5
# minutes. Note that this is different from negative caching of
# DNS lookups.
#
#negative_ttl 5
negative_ttl 5

#
# TAG: positive_dns_ttl (in minutes)
# Time-to-Live (TTL) for positive caching of successful DNS lookups.
# Default is 6 hours (360 minutes). If you want to minimize the
# use of Squid's ipcache, set this to 1, not 0.
#
#positive_dns_ttl 360
positive_dns_ttl 360

# TAG: negative_dns_ttl (in minutes)
# Time-to-Live (TTL) for negative caching of failed DNS lookups.
#
#negative_dns_ttl 5
negative_dns_ttl 5


# TIMEOUTS
#-----------------------------------------------------------------------------

# TAG: connect_timeout (in seconds)
# Some systems (notably Linux) can not be relied upon to properly
# time out connect(2) requests. Therefore the squid process
# enforces its own timeout on server connections. This parameter
# specifies how long to wait for the connect to complete. The
# default is two minutes (120 seconds).
#
#connect_timeout 120
connect_timeout 120

# TAG: read_timeout (in minutes)
# An active connection will be aborted after read_timeout minutes
# of no activity on that connection (i.e., assume the remote server
# or network connection died after the connection was established).
# The default is 15 minutes.
#
#read_timeout 15
read_timeout 15

# TAG: client_lifetime (in minutes)
# The maximum amount of time that a client (browser) is allowed to
# remain connected to the cache process. This protects the Cache
# from having alot of sockets (and hence file descriptors) tied up
# in a CLOSE_WAIT state from remote clients that go away without
# properly shutting down (either because of a network failure or
# because of a poor client implementation). The default is three
# hours, 20 minutes.
#
# NOTE: The default value is designed with low-speed client
# connections in mind. 200 minutes should be plenty of time to
# transfer a 10M file at 1k/sec. If you have high-speed client
# connectivity, or occasionally run out of file descriptors,
# we suggest you lower this value appropriately.
#
#client_lifetime 200
client_lifetime 200

# TAG: shutdown_lifetime (in seconds)
#
# When SIGTERM or SIGHUP is received, the cache is put into
# "shutdown pending" mode until all active sockets are closed.
# This value is the lifetime to set for all open descriptors
# during shutdown mode. Any active clients after this many
# seconds will receive a 'lifetime expire' message
#
#shutdown_lifetime 30
shutdown_lifetime 30

# TAG: clean_rate (in minutes)
# How often to force a full garbage collection. Garbage collection
# involves checking the expire time of every object in the cache.
#
# NOTE: this option is provided only for backwards compatibility.
# We recommend that you leave it disabled (i.e. set to -1). Expired
# objects are removed from the cache little by little as a part of
# its normal operations.
#
#clean_rate -1
clean_rate -1

# ACCESS CONTROLS
#-----------------------------------------------------------------------------

# Defining an Access List
#
# acl aclname src|domain|url_regex|urlpath_regex|time|port|proto|method string1 ...
#
# acl aclname src ip-address/netmask ...
# acl aclname src addr1/mask1-addr2/mask2 ... # range of addresses
# acl aclname domain foo.com ...
# acl aclname time day-abbrevs h1:m1-h2:m2
# day-abbrevs:
# S - Sunday
# M - Monday
# T - Tuesday
# W - Wednesday
# H - Thursday
# F - Friday
# A - Saturday
# h1:m1 must be less than h2:m2
# acl aclname url_regex ^http:// ... # regex matching on whole URL
# acl aclname urlpath_regex \.gif$ ... # regex matching on URL path only
# acl aclname port 80 70 21 ...
# acl aclname proto HTTP FTP ...
# acl aclname method GET POST ...

acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl all src 0.0.0.0/0.0.0.0

acl SSL_ports port 443 563
acl CONNECT method CONNECT

# Allowing or Denying access based on defined access lists
#
# Access to the HTTP port:
# http_access allow|deny [!]aclname ...
#
# Access to the ICP port:
# icp_access allow|deny [!]aclname ...

# Only allow access to the cache manager functions from the local host.
http_access deny manager !localhost
http_access deny CONNECT !SSL_ports

# Allow everything else
http_access allow all

# Reply to all ICP queries we receive
icp_access allow all

# TAG: cache_host_acl
# Just like 'cache_host_domain' but provides more flexibility by
# using ACL's.
#
# cache_host_acl cache-host [!]aclname ...
#
# NOTE: * Any number of ACL's may be given for a cache-host,
# either on the same or separate lines.
# * When multiple ACL's are given for a particular
# cache-host, the first matched ACL is applied.
# * Cache hosts with no domain or ACL restrictions arequeried
# queried for all requests.
# * There are no defaults.

# ADMINISTRATIVE PARAMETERS
#-----------------------------------------------------------------------------

# TAG: cache_mgr
# Email-address of local cache manager who will receive
# mail if the cache dies. The default is "webmaster."
#
#cache_mgr webmaster

# TAG: cache_effective_user
# If the cache is run as root, it will change its effective/real
# UID/GID to the UID/GID specified below. The default is not to
# change UID/GID.
#
#cache_effective_user nobody nogroup

# TAG: visible_hostname
# If you want to present a special hostname in error messages, etc,
# then define this. Otherwise, the return value of gethostname()
# will be used.
#visible_hostname www-cache.foo.org



# OPTIONS FOR THE CACHE REGISTRATION SERVICE
#-----------------------------------------------------------------------------
#
# This section contains parameters for the (optional) cache
# announcement service. This service is provided to help
# cache administrators locate one another in order to join or
# create cache hierarchies.
#
# An 'announcement' message is sent (via UDP) to the registration
# service by Squid. By default, the annoucement message is NOT
# SENT unless you enable it with 'cache_announce' below.
#
# The announcement message includes your hostname, plus the
# following information from this configuration file:
#
# http_port
# icp_port
# cache_mgr
#
# All current information is processed regularly and made
# available on the Web at http://www.nlanr.net/Cache/Tracker/.


# This is how frequently to send cache announcements. The default
# is `0' which disabled sending the announcement messages.
#
# To enable announcing your cache, just uncomment the line below.
#
#cache_announce 24
cache_announce 24

# This is the hostname and portnumber where the registration message
# will be sent.
#
# Format: announce_to host[:port] [filename]
#
# Hostname will default to 'sd.cache.nlanr.net' and port will default
# to 3131. If the 'filename' argument is given, the contents of that
# file will be included in the announce message.
#
#announce_to sd.cache.nlanr.net:3131





# HTTPD-ACCELERATOR OPTIONS
#-----------------------------------------------------------------------------

# TAG: httpd_accel
# If you want to run squid as an httpd accelerator, define the
# host name and port number where the real HTTP server is.
#httpd_accel your.real.httpd.host your.real.httpd.port
httpd_accel ph.net 80

# TAG: httpd_accel_with_proxy
# If you want to use squid as both a local httpd accelerator
# and as a proxy, change this to 'on'.
#httpd_accel_with_proxy off
httpd_accel_with_proxy on

# TAG: cache_hot_vm_factor
# This parameter is only used when the cache is running strictly
# in httpd_accel mode. In this case the cache keeps a number of
# objects entirely in memory. We keep 'hot_vm_factor' such
# objects for each megabyte of cache_mem. So, the number of
# number of hot_vm objects is calculated as
#
# hot_vm_count = cache_mem * hot_vm_factor / 1048576
#
# The default is 0.0, which disables hot_vm objects. The suggested
# value for httpd_accel_mode is 12.5.
#
#cache_hot_vm_factor 0.0
#cache_hot_vm_factor 12.5


# MISCELLANEOUS
#-----------------------------------------------------------------------------

# The DNS tests exit as soon as the first site is successfully looked up
#
# If you want to disable DNS tests, do not comment out or delete this
# list. Instead use the -D command line option
#
dns_testnames internic.net usc.edu cs.colorado.edu mit.edu yale.edu

# TAG: logfile_rotate #
# Specifies the number of logfile rotations to make upon receiving
# a USR1 signal. The default is 10, which will rotate with
# extensions 0 through 9. Setting logfile_rotate to 0 will
# disable the rotation, but the logfiles are still closed and
# re-opened. This will enable you to rename the logfiles yourself
# just before sending a USR1 signal to the squid process.
#
logfile_rotate 10

# TAG: append_domain
# Appends local domain name to hostnames without any dots in them.
# append_domain must begin with a period.
#
#append_domain .yourdomain.com
append_domain .ph.net

# TAG: err_html_text
# HTML text to include in error messages. Make this a "mailto"
# URL to your admin address, or maybe just a link to your
# organizations Web page.
err_html_text

# TAG: udp_hit_obj on|off
# If set, Squid will request UDP_HIT_OBJ replies from its neighbors.
udp_hit_obj on

# TAG: memory_pools on|off
# If set, Squid will keep pools of allocated (but unused) memory
# available for future use. If memory is a premium on your
# system, disable this.
memory_pools on

# TAG: forwarded_for on|off
# If set, Squid will include your system's IP address or name
# in the HTTP requests it forwards. By default it looks like
# this:
# Forwarded: by http://foo.org:3128/ for 192.1.2.3
# If you disable this, it will appear as
# Forwarded: by http://foo.org:3128/
forwarded_for on
Received on Mon Nov 25 1996 - 11:09:29 MST