Re: A stoopid question? (disk object balance)

If you choose the write your own software path, you might be able to hack
Sparent to serve your needs.

        -Bill

On Wed, 14 Jan 1998, Cameron Blackwood wrote:

>
>
> G'day,
>
> I am looking at setting up a squid cache here and I found the page on
> sizing for intel boxes very informative. I noticed that many people on
> that page had 'N' caches load sharing and I am wondering just how to
> configure mine to load share (well not load share in a network sense but
> a disk sense). Do I have to hack something like pluggw to get the objects
> spread over two machines?
>
> Basically I intend to have:
>
> +------------+ +------------+
> | proxy 1 | | proxy 2 |
> | IP: .9.10 | | IP: .9.11 |
> | IP: .9.20 | | | <--- 9.20 if proxy1 fails
> +------------+ +------------+
>
> with one box having a second IP number of 9.20 and 9.20 being the
> advertised IP address of the web proxy. .9.20 will fail over to the
> second box should the proxy1 fail. Both proxies will be siblings of
> each other, so from that point of view they will be 'one cache', but
> how do I share the requests so that the objects are shared over the
> machines.
>
> Now at this stage you are probably saying 'use a cisco redirector box'
> but I am too cheap for that :). I dont want to use a DNS magic
> solution either (we dont run smart DNS and its hard to change it). I dont
> really care about net bandwidth between these boxes (we have a
> switched 100M ethernet), so what I really want is to share the requests
> between the boxes directly so the objects end up on disk on each box.
>
> I cant see any way for squid on proxy1 to send, say 50%, of its misses
> to proxy 2. I think running a 'nanoproxy' on the 9.20 address that has
> both real caches as its parent and uses round-robin but no local
> disk space it self looks too hard (well it would be easy, but I cant
> see an easy way to do it without using more disk space :( and I just
> dont want that complexity).
>
> My solution is looking like writeing something like pluggw which sits on
> 9.20 and shares the load by redirecting the requests to 9.10 or 9.11 (randomly
> or something).
>
> I know I am going to get problems with object consistancy etc, but I
> can live with that.
>
>
> Any comments on this?
>
>
> cheers,
> cam
>
> --
> / `Rev Dr' C.Blackwood@bom.gov.au skeptic, virtual goth \
> < [+61 3] 9669 4268 BSD Unix, C/C++, genetics, ATM >
> \ The BoM. http://explorer.ho.bom.gov.au/~cameron/ /
> ____ finger korg@nod.zikzak.net for PGP/Geek Code and stuff ____
>
> On the side of the software box, in the "System Requirements" section,
> it said "Requires Windows 95 or better". So I installed Linux.
>
Received on Wed Jan 14 1998 - 21:21:15 MST