At 09:18 AM 7/6/99 -0400, Rob Harris wrote:
>Greetings all--
>
>Has anyone figured out how to make squid use more than one ethernet card
>to retrieve objects into it's cache?
>
>I have a unix box (linux rh6) running squid (latest) with a multiport
>ethernet card (10mb) behind a switch and a router tied to a T3. I would
>like squid to round robin/load balance the traffic amongst the 4 ports on
>the multiethernet card if possible as I have an obscene amount of traffic
>that I pass through this box.
I'd say a dedicated 100Mbps full duplex switch port will suit you better.
>Any thoughts would be most helpful.
>
>--Rob
>____________________________________________________________________________
>Rob Harris 9885 North Washington Blvd. ph: 301.598.0500
>SkyCache, Inc. Laurel, MD 20723 x2236
>rharris@skycache.com "My opinions are my own." fax: 301.598.0837
>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
--------------------------------------------------------------------
Marc van Selm
NATO C3 Agency
Communication Systems Division, A-Branch
Tel: +31 70 3142454
E-mail: marc.van.selm@nc3a.nato.int
--------------------------------------------------------------------
Private: [email protected], [email protected], http://www.cistron.nl/~selm
=== I don't suffer from insanity; I enjoy every minute of it. ===
Received on Wed Jul 07 1999 - 04:06:23 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:47:18 MST