Re: squid question

What Squid version are you using?

Squid-2 will put 50% of the cache creation load on the new drive, and
25% on each of the old drives. The different cache_dir stores are
maintained separately and it should not fill the drives to 100% if
properly configured.

If your are running Squid-1 then you must clean your cache when
adding/removing a cache_dir entry, or Squid will loose track of most of
the files.

--
Henrik Nordstrom
Squid hacker
Permission Denied wrote:
> 
> Hi Henrik!
> 
> I have the following problem:
> 
> Squid was running with 2 disks.  I added a third one when
> the first two were at 80% full.  The two disks now are
> at 100% while the new disk is still at 16%
> 
> Two things don't happen: first why dosn't the third disk take
> all the cache requests.  how can I force a tune with a totel
> of three disks?  second the LRU does not work for the first
> two disks.  is this related to the noatime mount?
> 
> Finally what happened to your great snapshots ??
> 
> a 3 word reply (pointers, hints, redirectors) will
> be greatly appreciated!
> 
> all the best,
> 
> --
> Alexandros C. Couloumbis
> alex@ozo.com
> alex@eexi.gr
> alex@tee.gr
> Athens, Greece