Re: transparent proxy Not working..

What is in the access.log file when this happens? Can you use tcpdump to
see if packets are making it to the machine?

On Wed, 3 May 2000, Nick wrote:

> I Believe the Squid machine has been setup correctly
> i added
> "ipchains -I input -p tcp -s ! 208.225.84.29 -d 0.0.0.0/0 80 -j REDIRECT 3128"
> and also added the commands in the squid.conf file
>
> httpd_accel_host virtual
> httpd_accel_port 80
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
>
> then i went and added the route-map proxy-redirect info..
> into our cisco 2620 router running IOS 12.0
> so the cisco config looks like..
>
> access-list 110 deny tcp any any neq www
> access-list 110 deny tcp host 208.225.84.29 any
> access-list 110 permit tcp any any
> route-map proxy-redirect permit 10
> match ip address 110
> set ip next-hop 208.225.84.29
>
> then when i enable the routemap with the command
>
> interface Ethernet0
> ip policy route-map proxy-redirect
>
> it accepts the command.. but then i take out the proxy info from
> my browser and no luck.. it seems to resolve the IP..
> but no traffic it doesnt download the page..
> and if i remove that command for the ethernet0
> it starts working again.. put in the proxy info into IE
> and the proxy works again too..
> does anyone have any ideas.. anything i can do or info to
> troubleshoot?? any help would be appriciated..
> thanks in advance
> ~Nick
>
>
>
>

Russell Mosemann * Computing Services * Concordia University, Nebraska
Received on Wed May 03 2000 - 13:51:25 MDT