Re: CPU utilization question

Dear Andrew Lowe,

I just upgrade it from 32M to 64M so I don't hit the limit yet. Anyway I do
not know how to go beyond 64M and I might have to upgrade it, thank you for
suggestion. Can I add exactly as you gave me (including double quotation
mark) in to the last line in lilo.conf?

Currently my machine use no swap and have no problem with CPU loading. My
information is to say I use very low on CPU even it is 486 so if Don
Nightingale's machine consume 99% it should be either some thing wrong or
there are other process running. Actually from the average CPU loading 30%,
10% is from "top" which I ran and update it every 5 second. It jump to 70%
sometime but still no impact on overall performance.

Regards,
Karn Kanjanarat.

----- Original Message -----
From: Andrew Lowe <alowe@pccentre.com.au>
To: Karn.k <karn.k@thaiaromatics.com>
Cc: Nightingale, Don <Don.Nightingale@TheMentorNetwork.com>;
<squid-users@ircache.net>
Sent: Thursday, August 03, 2000 10:19 AM
Subject: Re: CPU utilization question

> if running under linux, check how much RAM linux sees, i know sometimes it
> will only see 64Mb unless you tell it to use more in your lilo.conf... add
> a line something like
> append = "mem = 128M"
>
> that way you might get more ram, and free up the cpu..
>
>
> Andrew Lowe
> andrew@pccentre.com.au
> The South Coast Professional Computing Centre
> + Hislora Website Hosting & Design
> + Daly & Daly Computer Training
> + Flatearth Internet Cafe
> Ph: 02 4423 7771
> Fax: 02 4423 7772
> email: sales@pccentre.com.au
>
> On Thu, 3 Aug 2000, Karn.k wrote:
>
> > I don't know if this help. My squid is on 486/66 machine with 64M RAM.
I
> > got three IDE disks, one for system and the other two for cache of size
> > 1.5GB and 800MB. My average CPU usage is about 30%. It occationally
jump
> > up to 70%. My squid serve peak load during office hour at about 1.5
request
> > per second. Do your sever serve other function than Squid?
> > ----- Original Message -----
> > From: Nightingale, Don <Don.Nightingale@TheMentorNetwork.com>
> > To: <squid-users@ircache.net>
> > Sent: Thursday, August 03, 2000 3:27 AM
> > Subject: CPU utilization question
> >
> >
> > > I have squid running on a 550Mhz Compaq proliant w/128M of RAM (Linux
v2.2
> > > kernel), and and 18G raid 5 array. Regardless of the # of active
users,
> > the
> > > process runs at 99% CPU, but at a low priority. Is this normal
behavior?
> > >
> > > It seems to be running fine in any case.
> >
Received on Wed Aug 02 2000 - 22:21:37 MDT