Re: System Requirements

I think the suggested requirements for squid were taken a lot less mild
and were just aimed at where people think you'd use it. With a good PII
300 and SCSI you probably can go to 1500 users. Personally I've ran squid
on a Dual PII 400 with SCSI at 13000req/min servicing over 3000 users.

Squid in comparison to MS Proxy is a lot more suitable for high
performance. If you are considering a proxy for anything above 500 users
drop MS. If you want something cheap and easily maintainable you can
allways go for a Novell ICS based "appliance" like the ones from Dell.

Dirk Moerenhout ///// System Administrator ///// Planet Internet NV

On Fri, 4 Aug 2000, Kevin Ruggiero wrote:

>
> I'm currently looking into proxying solutions, and I noticed that the
> recommended configuration on the squid site is PII 300 with SCSI
> hard drives (that was listed as of 1998). When I look at the requirements
> for Microsoft Proxy Server, they are actually very low (P133 w/ 64RAM
> suggested for supporting 0-300 PCs).
>
> I know sys requirements can be very subjective, and the squid site
> didn't mention how many desktops that would support, but I'm wondering why
> there's such a large gap. Can anyone offer some insight here? What would
> I really need on squid to get good performance while supporting about 100
> PCs?
>
> Thanks.
>
>
> -----
> Kevin Ruggiero -- SUNY at Buffalo
> E-mail: kdr@Buffalo.EDU
> URL : http://www.cse.buffalo.edu/~kdr
>
Received on Mon Aug 07 2000 - 04:11:52 MDT