Re: [SQU] Squid & RTSP

Unfortunately, I have to say this is not to do with Squid; please move the
discussion offline. I have downloaded and installed the rtsp proxy (and
the raproxy) from http://www.real.com/ and it works great. Write to me if
you've checked there and can't compile or something.

But again, it's not a Squid issue. Thanks.

>K,
>as you know proxy do some address translations (in Transport layer)
>just for some TCP/UDP based protocols, there are many protocols
>that do not work with such translations, so if you wish to use almost all
>(not all till now) protocols with invalid IP addresses (e.g.:10.0.0.0
>172.16.0.0 192.168.0.0)
> you should use kind of IP address translation (e.g.: Masquerading / NAT)
>with ipfwadm | ipchains | iptables,
>if you wish to do this let me know your topology.
>
>in order to have
>Best Regards
>
>Mehrdad Fatemi
>R&D Director
>
< AFRANET Co. ---------------------------- R&D Dept. >

-----Original Message-----
From: Lee Edward Armstrong <lee@darklyte.freeserve.co.uk>
To: squid-users@ircache.net <squid-users@ircache.net>
Date: Thursday, September 07, 2000 8:18 PM
Subject: Re: [SQU] Squid & RTSP

Hi there,

> If you are using valid IP addresses you should just bypass the protocol
from
> cache,
> otherwise after bypassing them from cache try to masquerade/Nat the
> protocol.

We use network 10 for all local machines, hence the need for a
proxy....

cya,
Lee

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html