[SQU] proxy chains

Hi, I have a question. I have the following network diagram
===========================

                         |----------- Proxy C-->Internet
                         |
client 1 -----Proxy A----- --Proxy B-->Internet
                                   |
                           client 2
========================
both B and C are connected to Internet directly, B is the parent of A, and C
is the parent of B, B and C are on the same network segment, for Client 2,
yes, I can access Internet by C ,that means it goes B->C->Internet, but for
client 1,
 it goes A->B->Internet, why not goes A->B->C->Internet ?
how to set up squid.conf ?

thank you
Jephe

----- Original Message -----
From: Henrik Nordstrom <hno@hem.passagen.se>
To: Leonardo Rodrigues <coelho@persogo.com.br>
Cc: <squid-users@ircache.net>
Sent: Wednesday, December 27, 2000 7:55 AM
Subject: Re: Reverse Proxy ( accelerated mode )

Leonardo Rodrigues wrote:

> First of all, sorry for bothering you again. I'd just like to know if you
> have or know about the existence of a quick guide for setting up Squid on
> accelerated mode. A text, howto, reference guide .....

It is not a very complicated thing. See the message on my recommended
setup posted some hours ago.

There are some incomplete and confused notes in the Squid FAQ. Will try
to get that updated.

I think there is also a section in the Users-guide, but it most likely
suffers from the same problems as the FAQ notes..

> I'd like to know too if a single Squid configured with accelerated
mode,
> can be used for several web servers, with different pages running on port
80.

Yes, by using my recommended setup any number of accelerated domains are
supported, distributed on any number of backend servers.

--
Henrik Nordstrom
Squid hacker
--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html