Re: [SQU] Squid & Apache

then apply ..

ipfw add 30 allow tcp from your.machine.ip.address to any
ipfw add 40 fwd 127.0.0.1,3128 tcp from any to any 80
ipfw add 50 fwd 127.0.0.1,3128 tcp from any to any 8080

I am running squid in Transparent mode with apache. on my two FreeBSD
Systems.

NOTE: You have to configure your squid in Transparent Mode, If you are still
on the road go to FAQ section on squid site.

Ahsan Saleem Khan
Sr. System Admin
OneNet (Sun Communication Pvt)
http://www.one.net.pk
Cisco Certified Network Associate (2.0)
http://www.brainbench.com/transcript.jsp?pid=525156

----- Original Message -----
From: "Johnny Lee" <johnny@pcinterlink.com>
To: "Ahsan Khan" <ahsank@one.net.pk>
Sent: Wednesday, February 07, 2001 1:53 AM
Subject: RE: [SQU] Squid & Apache

> I am using freeBSD
>
> -----Original Message-----
> From: Ahsan Khan [mailto:ahsank@one.net.pk]
> Sent: Tuesday, February 06, 2001 12:34 PM
> To: Johnny Lee; Squid ML
> Subject: Re: [SQU] Squid & Apache
>
>
> Use FreeBSD.
>
>
> Ahsan Saleem Khan
> Sr. System Admin
> OneNet (Sun Communication Pvt)
> http://www.one.net.pk
> Cisco Certified Network Associate (2.0)
> http://www.brainbench.com/transcript.jsp?pid=525156
> ----- Original Message -----
> From: "Johnny Lee" <johnny@pcinterlink.com>
> To: "Squid ML" <squid-users@ircache.net>
> Sent: Wednesday, February 07, 2001 12:34 AM
> Subject: [SQU] Squid & Apache
>
>
> > Anyone setup a box using both of these? I need squid to do transparent
> proxy
> > & authentication but I would like to keep apache on port 80 also. Is
there
> > some way to do it? Thanks
> >
> > Johnny
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
> >
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>
>
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html