Re: [SQU] NTLM under squid2.5

From: Robert Collins <[email protected]>
Date: Wed, 28 Feb 2001 15:16:14 +1100

Tony,
ntlm helpers (ie fakeauth) are activated the same way as any auth
helper - via the proxy_auth acl. See squid.conf under acl, and the FAQ &
Users Guide.

Rob

----- Original Message -----
From: "Tony Melia" <Tony.Melia@downsmicro.com.au>
To: "'Robert Collins'" <robert.collins@itdomain.com.au>;
<squid-users@ircache.net>
Sent: Wednesday, February 28, 2001 11:34 AM
Subject: RE: [SQU] NTLM under squid2.5

> Ok, recompiled and squid now runs ok, but I get no usersnames. I have
> 'auth_param ntlm program /usr/bin/fakeauth_auth mydomain\server' as
the auth
> to use (the only auth - I am not using basic).
>
> How do I actually use fakeauth e.t.c.?? again, I just want usernames.
>
> Regards.
>
> -----Original Message-----
> From: Robert Collins [mailto:robert.collins@itdomain.com.au]
> Sent: Tuesday, 27 February 2001 10:01pm
> To: Tony Melia; squid-users@ircache.net
> Subject: Re: [SQU] NTLM under squid2.5
>
>
> You can NOT run authentication and transparent mode simultaneously.
>
> you also need to add
> --enable-auth=ntlm
> to the configure line
>
> Rob
>
> ----- Original Message -----
> From: "Tony Melia" <Tony.Melia@downsmicro.com.au>
> To: "Squid-Users (E-mail)" <squid-users@ircache.net>
> Sent: Tuesday, February 27, 2001 10:24 PM
> Subject: [SQU] NTLM under squid2.5
>
>
> > I downloaded and compiled squid 2.5 with ----
> >
> >
>
/configure --enable-xmalloc-statistics --enable-icmp --enable-delay-poo
> ls
> > --
> > enable-snmp --enable-time-hack --enable-ipf-transparent
> > --disable-internal-dns -
> > -prefix=/usr/squid5 '--enable-ntlm-auth-helpers=NTLMSSP fakeauth
> no_check'
> >
> > I want to get squid to authenticate (for autdit only - not access
> control)
> > against an NT PDC. In the config I have put --
> >
> > auth_param ntlm program /usr/bin/fakeauth_auth
> >
> > I had to manually compile (by going into it's directory and running
> make,
> > and copying it to /usr/bin) the fakeauth_auth.
> >
> > I get the following when I run squid
> >
> > Parsing Config File: Unknown authentication scheme 'ntlm'.
> >
> >
> > ANy suggestions?
> >
> > Regards,
> > TOny
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
> >
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
Received on Tue Feb 27 2001 - 21:17:16 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:58:15 MST