RE: [squid-users] Logging NTLM information.

Right, now I have

 ../bin/squid -v
Squid Cache: Version 2.5-DEVEL
configure options: --enable-ntlm-auth
--enable-ntlm-auth-helpers=fakeauth

I have gone into squid.conf and uncommented the following lines :

auth_param ntlm program /usr/local/squid/bin/ntlm_auth
auth_param ntlm children 5
auth_param ntlm max_challenge_reuses 0
auth_param ntlm max_challenge_lifetime 2 minutes

then do a

#./squid -k reconfigure
2001/11/15 16:44:04| Parsing Config File: Unknown authentication scheme
'ntlm'.
2001/11/15 16:44:04| Parsing Config File: Unknown authentication scheme
'ntlm'.
2001/11/15 16:44:04| Parsing Config File: Unknown authentication scheme
'ntlm'.
2001/11/15 16:44:04| Parsing Config File: Unknown authentication scheme
'ntlm'.

What am I doing wrong?

Thanks again.

M.
> -----Original Message-----
> From: Robert Collins [mailto:robert.collins@itdomain.com.au]
> Sent: Thursday, 15 November 2001 4:12 PM
> To: Michael T. Cheshire; squid-users@squid-cache.org
> Subject: RE: [squid-users] Logging NTLM information.
>
>
> You are missing --enable-ntlm-auth on the configure line.
>
> Rob
>
> > -----Original Message-----
> > From: Michael T. Cheshire [mailto:michael.cheshire@microarts.com.au]
> > Sent: Thursday, November 15, 2001 4:26 PM
> > To: Robert Collins; squid-users@squid-cache.org
> > Subject: RE: [squid-users] Logging NTLM information.
> >
> >
> > So this is correct?
> >
> > /usr/local/squid/bin/squid -v
> > Squid Cache: Version 2.5-DEVEL
> > configure options: '--enable-ntlm-auth-helpers=fakeauth no_check'
> >
> > Thanks,
> >
> > M.
> >
> > > -----Original Message-----
> > > From: Robert Collins [mailto:robert.collins@itdomain.com.au]
> > > Sent: Thursday, 15 November 2001 4:03 PM
> > > To: Michael T. Cheshire; squid-users@squid-cache.org
> > > Subject: RE: [squid-users] Logging NTLM information.
> > >
> > >
> > > Michael,
> > > setup NTLM on a squid 2.5-dev machine, and use the
> fakeauth helper.
> > >
> > > Rob
> > >
> > > > -----Original Message-----
> > > > From: Michael T. Cheshire
> > [mailto:michael.cheshire@microarts.com.au]
> > > > Sent: Thursday, November 15, 2001 4:22 PM
> > > > To: squid-users@squid-cache.org
> > > > Subject: [squid-users] Logging NTLM information.
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I was wondering if anyone could help me.
> > > >
> > > > I am trying to get squid to log who is going where using NTLM
> > > > authentication. I only need to log this information I do
> > not need to
> > > > allow/disallow access based on usernames/passwords.
> > > >
> > > > After some looking around I am confused as to whether this
> > > > ability (NTLM
> > > > authentication) is present in the latest version of Squid
> > > or whether a
> > > > patch is needed - I did find a patch at one stage, but could
> > > > not get it
> > > > to apply to the source.
> > > >
> > > > Can anybody help me or at least point me in the right direction
> > > > (links/faqs/howtos).
> > > >
> > > > Thankyou all for your time.
> > > >
> > > >
> > > > ---
> > > >
> > > > Regards,
> > > >
> > > > --------------------------------------------------------------
> > > > ---------
> > > > Michael Cheshire
> > > > Network Engineer
> > > > Microarts Pty Ltd
> > > > mailto:michael.cheshire@microarts.com.au
> > > > <mailto:michael.cheshire@microarts.com.au>
> > > > http://www.microarts.com.au <http://www.microarts.com.au/>
> > > > PH : 8373 7000 / 0402 277 092
> > > > --------------------------------------------------------------
> > > > ---------
> > > >
> > > >
> > >
> >
>
Received on Wed Nov 14 2001 - 22:46:45 MST