> With a RedHat 7.1, Squid 2.4.STABLE2, I'm reaching a maximum peak of 90
> trans./sec. in a Dual Pentium III 1 Ghz.
>
> However, the squid process reaches almost 100% CPU use with 60 trans./sec.
I've been seeing this on my machines, too. I run a Squid as an
accelerator. My old setup had an AMD K6-2/500 with 256MB and a single
9GB fast wide SCSI disk. It was able to handle 250 reqs/sec and the
CPU was about 50% busy. Then I upgraded the system to an Athlon. I
kept all the other parts the same, just changing the motherboard and
CPU. Now with the Athlon, I get almost 100% CPU busy at about 100
reqs/sec. This seems odd. Nothing else has changed. Any ideas?
I'm running FreeBSD with soft updates enabled.
-- Stan Schwarz | Extreme sports...offer "some kind of physical System Administrator | analog to the thrill of installing Linux or USGS Pasadena Office | other open-source operating systems." http://pasadena.wr.usgs.gov | -Mikki Halpin, _The Geek Handbook_Received on Tue Nov 20 2001 - 09:30:32 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:04:21 MST