[squid-users] SIBLING NOT RESPONDING !

hi henrik
hi all

i guess am in serious trouble not able to configure various squid as sibling
spl. pc no 1 & 2 which is not allowing anything from neighbour squid pc..
the squid.conf is the same on all of them with only the sibling entry being
different, which is given be,low for each pc....
the squid is acting as transparent proxy !

===============================
pc no1 : XXXX.85 <<<< pc no 1 & 2 are at office no1 !

cache_peer XXXX.71 sibling 3128 3130
HTTP/1.0 200 OK
.
X-Cache: MISS from cable/2
Proxy-Connection: close
Cache Clients:
Address: XXXY.37
Name: XXXY.37
Currently established connections: 0
    ICP Requests 31
        UDP_DENIED 31 100%
    HTTP Requests 1
        TCP_MISS 1 100%
Address: 127.0.0.1
Name: 127.0.0.1
Currently established connections: 1
    ICP Requests 0
    HTTP Requests 2
        TCP_MISS 2 100%
Address: XXXZ.82
Name: XXXZ.82
Currently established connections: 0
    ICP Requests 126
        UDP_DENIED 126 100%
    HTTP Requests 0

TOTALS
ICP : 157 Queries, 0 Hits ( 0%)
HTTP: 3 Requests, 0 Hits ( 0%)
====================================
pc-no2: XXXY.37 <<<< my desktop!
cache_peer XXXX.85 sibling 3128 3130
cache_peer XXXX.71 sibling 3128 3130

HTTP/1.0 200 OK
.
Proxy-Connection: close
Sibling : xxxx.71/3128/3130
..
PINGS ACKED: 183 98%
FETCHES : 42 23%
IGNORED : 119 65%
Histogram of PINGS ACKED:
         ICP_HIT : 126 69%
        ICP_MISS : 57 31%
keep-alive ratio: 100%
====================
pc no 3 : XXXZ.67 <<<< this is connected via WAN to main office
cache_peer XXXX.71 sibling 3128 3130
cache_peer XXXX.85 sibling 3128 3130
cache_peer XXXY.37 sibling 3128 3130

HTTP/1.0 200 OK
..
Proxy-Connection: close
 
Sibling : xxxx.71/3128/3130
Flags :
Address[0] : xxxx.71
Status : Up
...
Histogram of PINGS ACKED:
         ICP_HIT : 506 12%
        ICP_MISS : 3888 88%
keep-alive ratio: 96%

Sibling : XXXY.37/3128/3130
Flags :
Address[0] : XXXY.37
...
Histogram of PINGS ACKED:
        ICP_MISS : 4388 100%
keep-alive ratio: 0%

================
pc no 4 : XXXZ.82 <<<< connected via WAN to pc no 4 network
cache_peer XXXZ.67 sibling 3128 3130
cache_peer XXXX.85 sibling 3128 3130
cache_peer XXXX.71 sibling 3128 3130
cache_peer XXXY.37 sibling 3128 3130

HTTP/1.0 200 OK
..
Proxy-Connection: close
Sibling : XXXZ.67/3128/3130
Flags :
Address[0] : XXXZ.67
...
Histogram of PINGS ACKED:
         ICP_HIT : 37 3%
        ICP_MISS : 1039 97%
keep-alive ratio: 100%

Sibling : XXXX.71/3128/3130
Flags :
Address[0] : XXXX.71
...
Histogram of PINGS ACKED:
         ICP_HIT : 275 26%
        ICP_MISS : 768 74%
keep-alive ratio: 99%

Sibling : XXXY.37/3128/3130
Flags :
Address[0] : XXXY.37
....
Histogram of PINGS ACKED:
        ICP_MISS : 1048 100%
keep-alive ratio: 0%
================================

to add to all this now the XXXX.85 has stopped communicatting at all as u can
see at para pc no : XXXX.85 however its working fine as transparent proxy for
one lan segmented network !
iam wondeing why this is hapenning when the conf files are same & only the
sibling entry is dofferent..ooh & the mem specification too !... to add to it
all have same hardware configuration too(only mem dofferent).....
all have squid-2.4stab2 & only one is on squid 2.4stab1 comming with RH 7.2
i have compiled squid 2.4stab2 with the same opriong for all squid servers,
if XXXZ.67 works fine accepting & throwing sibling queries why not others ???

can anyone suggest me where i went wrong ?...
where can i find a good resources for variious commands for clients--i went
thru the sites but didnt find much there
the command i applied was--->
client cache_object://localhost/server_list

awaiting for ur help & suggestions

arindam
Received on Fri Nov 30 2001 - 08:44:27 MST