Re: [squid-users] Help: transparent Proxy + https problems

Use iptables instead of ipchains.Only kernel < 2.4 serise support ipchains.

/sbin/iptables -t nat -A POSTROUTING -p tcp -dport 443 -j MASQUERADE

Regards
Jack
  ----- Original Message -----
  From: David Yahoo
  To: Jack
  Sent: Saturday, December 08, 2001 6:54 AM
  Subject: Re: [squid-users] Help: transparent Proxy + https problems

  When i Try to enter my ipchain it say protocol not supported any
advice?When i do a ipchains -L i get a not comaptible with kernel version
but i have a 2.4.16 Kernel.
    ----- Original Message -----
    From: Jack
    To: David Yahoo
    Sent: Monday, November 26, 2001 12:35 PM
    Subject: Re: [squid-users] Help: transparent Proxy + https problems

    pre-requests
    1) ip_gre should be enabled in your kernel, if not enable ip_gre and
recompile your kernel.
    2) WCCP was supported by squid 2.3 and later version only(better to use
squid-2.4.STABLE1)
    3) squid supports only WWCPv1 only.

    Configuration
    1)In squid 2.4 and later, by default wccp is enabled.if it is 2.3 then
you have to configure squid with --enable-wccp
    2)In squid.conf edit wccp_router 0.0.0.0 as wccp_router your router ip
        and wccp_version with appropriate version.

    IN router use the following command
    ip wccp version 1
    ip wccp web-cache
    !
    interface Ethernet0/0
    ip wccp web-cache redirect out

    -Jack

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

Received on Sun Dec 09 2001 - 22:12:55 MST