RE: [squid-users] smb_auth not working yet

OK, now I'm getting somewhere. I had the domain name wrong.

The output is now as follows:

./smb_auth -W domain -U xxx.xxx.xxx.xxx -d
ntusername xxxxxxxx
Domain name: domain
Pass-through authentication: no
Query address options: -U xxx.xxx.xxx.xxx -R
Domain controller IP address: xxx.xxx.xxx.xxx
Domain controller NETBIOS name: SERVER
Contents of //SERVER/NETLOGON/proxyauth:
ERR

I did make a file called proxyauth with the word "allow" in it (no quotes)
and placed it in the right place. But I still get the ERR response. The
sharing permissions for the directory containing proxyauth are EVERYONE
Read.
Why am I still getting ERR?

-----Original Message-----
From: Alceu Rodrigues de Freitas Junior
[mailto:alceu.rodrigues@wws.com.br]
Sent: Tuesday, January 29, 2002 4:54 PM
To: Eric Engen
Subject: RE: [squid-users] smb_auth not working yet

yes. you should check the exactly procedure at Squid websites. type
smb_auth in the search box. this should make it.

but first you need the authentification to work. put the domain name AND
the IP from de PDC.

On Tue, 29 Jan 2002, Eric Engen wrote:

> Doesn't the -U in smb_auth specify the IP number of the PDC? That's what I
> put in place of the xxx.xxx.xxx.xxx.
>
> In the command ./smb_auth -W ntserver, I actually put "ntserver", which is
> defined in my lmhosts file and in my /etc/hosts file. Should this be
> something different?
>
> Is there any preparation or configuration that must be done to the PDC in
> order for smb_auth to work?
>
> -----Original Message-----
> From: Alceu Rodrigues de Freitas Junior
> [mailto:alceu.rodrigues@wws.com.br]
> Sent: Tuesday, January 29, 2002 1:52 PM
> To: Eric Engen
> Subject: RE: [squid-users] smb_auth not working yet
>
>
> Try to find the IP number of the PDC and put it in the command to test.
> Seems to be that the PDC is not responding.
>
> On Tue, 29 Jan 2002, Eric Engen wrote:
>
> > OK, I made the link. Now I get a different message. What does this mean?
> >
> > ../smb_auth -W ntserver -d
> > ntusername xxxxxxxx
> > Domain name: ntserver
> > Pass-through authentication: no
> > Query address options:
> > Domain controller IP address:
> > ERR
> >
> > ../smb_auth -W ntserver -U xxx.xxx.xxx.xxx -d
> > ntusername xxxxxxxx
> > Domain name: ntserver
> > Pass-through authentication: no
> > Query address options: -U xxx.xxx.xxx.xxx -R
> > Domain controller IP address:
> > ERR
> >
> >
> > -----Original Message-----
> > From: Shalkebaev,AntonMSCAG [mailto:ShalkebaevA@msc.xm.mitsui.co.jp]
> > Sent: Tuesday, January 29, 2002 10:05 AM
> > To: 'Eric Engen'
> > Subject: RE: [squid-users] smb_auth not working yet
> >
> >
> > Try to find nmblookup, and make link
> >
> > On Tuesday, January 29, 2002 6:27 PM, Eric Engen [SMTP:eengen@esu10.org]
> > wrote:
> > > I configured Squid 2.4 STABLE3 to use smb_auth by typing
> > > ./configure --prefix=/usr/local/squid2 --enable-auth-modules=SMB
> > > then ran make, then make install. All seemed OK.
> > >
> > > Then I went to the auth_modules/SMB, and ran make and make install
> > > but when I test it on a command line by typing
> > > smb_auth -w domain -d
> > > testuser1 xxxxxxxx
> > >
> > > I get the following message:
> > > /usr/local/squid2/libexec/squid/smb_auth.sh:
> > /usr/local/samba/bin/nmblookup:
> > > No such file or directory
> > > Domain controller IP address:
> > > ERR
> > >
> > > I have installed Samba-2.2.2 using an RPM for redhat6.2, but it
doesn't
> > put
> > > anything in /usr/local/samba.
> > >
> > > Can anyone tell me what to try now?
> > >
> > > Thanks.
> > >
> > > Eric Engen
> > > Platte Valley Academy
> > > Shelton, Nebraska
> > > http://www.plattevalley.org
> >
> >
> > .
> >
>
> --
> Go away or I'll replace you with a very short shell script.
>
>
>
> .
>

--
Go away or I'll replace you with a very short shell script.