[squid-users] Squid-2, FreeBSD and WCCPv1

I am configuring Squid-2, FreeBSD and WCCPv1. I have successfully configured
the relative patches and IPFW functions into the kernel following the squid
FAQ. And now am starting up squid-2. I can't seem to get pass squid -z. The
error message, squid.conf and IPFW configuration is listed bellow. I would
appreciate it some pointers can be given.

Thanks in advance and best regards,

-nick/
----------------------------------------------------------------------------
------------------

at# /usr/local/squid/bin/squid -z
2002/02/19 10:19:39| squid.conf line 7: http_access deny all
2002/02/19 10:19:39| aclParseAccessLine: ACL name 'all' not found.
2002/02/19 10:19:39| squid.conf line 7: http_access deny all
2002/02/19 10:19:39| aclParseAccessLine: Access line contains no ACL's,
skipping
2002/02/19 10:19:39| squid.conf line 8: icp_access deny all
2002/02/19 10:19:39| aclParseAccessLine: ACL name 'all' not found.
2002/02/19 10:19:39| squid.conf line 8: icp_access deny all
2002/02/19 10:19:39| aclParseAccessLine: Access line contains no ACL's,
skipping
2002/02/19 10:19:39| squid.conf line 9: ident_lookup_access deny all
2002/02/19 10:19:39| aclParseAccessLine: ACL name 'all' not found.
2002/02/19 10:19:39| squid.conf line 9: ident_lookup_access deny all
2002/02/19 10:19:39| aclParseAccessLine: Access line contains no ACL's,
skipping
2002/02/19 10:19:39| squid.conf line 11: snmp_access deny all
2002/02/19 10:19:39| aclParseAccessLine: ACL name 'all' not found.
2002/02/19 10:19:39| squid.conf line 11: snmp_access deny all
2002/02/19 10:19:39| aclParseAccessLine: Access line contains no ACL's,
skipping
2002/02/19 10:19:39| Creating Swap Directories
FATAL: Failed to make swap directory /usr/local/squid/cache: (13) Permission
denied
Squid Cache (Version 2.4.STABLE3): Terminated abnormally.
CPU Usage: 0.001 seconds = 0.001 user + 0.000 sys
Maximum Resident Size: 1604 KB
Page faults with physical i/o: 0

at# more /usr/local/squid/etc/squid.conf
http_port 8080
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on

at# ipfw -a l
00100 0 0 allow ip from any to any via lo0
00110 1157 197568 allow tcp from 200.100.225.12 to any
00120 0 0 fwd 127.0.0.1,8080 tcp from any to any 80
00200 0 0 deny ip from any to 127.0.0.0/8
00300 0 0 deny ip from 127.0.0.0/8 to any
00400 7 479 allow ip from 200.100.225.12 to 200.100.224.0/19
00500 0 0 allow ip from 200.100.225.12 to 200.100.208.0/20
00600 1192 78250 allow ip from 200.100.224.0/19 to 200.100.225.12
00700 0 0 allow ip from 200.100.208.0/20 to 200.100.225.12
00800 0 0 allow tcp from any to any established
00900 0 0 allow ip from any to any frag
01000 0 0 allow tcp from any to 200.100.225.12 25 setup
01100 0 0 allow tcp from 200.100.225.12 to any setup
01200 0 0 deny tcp from any to any setup
01300 0 0 allow udp from 200.100.225.12 to any 53 keep-state
01400 0 0 allow udp from 200.100.225.12 to any 123 keep-state
65535 0 0 deny ip from any to any
Received on Mon Feb 18 2002 - 20:39:51 MST