RE: [squid-users] Outlook Web Access 2000 will not work with squid??Tried suggestions in archives, no luck...

From: Wei Keong <[email protected]>
Date: Wed, 7 Aug 2002 21:59:02 +0800 (Singapore Standard Time)

Maybe you should run some test and capture the exact cache.log and
access.log to see what are the causes...

my 0.02,
Wei Keong

On Wed, 7 Aug 2002, Paul Henne wrote:

> Thank you everyone for your help!
>
> I have tried using extension_methods SEARCH. Unfortunately, this does
> not resolve the problem. I was under the impression (especially after
> briefly looking at the code) that using this method is equivalent to
> editing the source. However I will try that and see what happens as I
> did not look at the code extensively.
>
> I have tried all methods given in the squid-users mailing list archive
> dating back to year 2000 on this problem. None have fixed the problem
> for me... :(
>
> Also I forgot to give my platform: Red Hat Linux 7.2 (I have removed
> the squid 2.4-STABLE1 RPM from Red Hat before installing my current
> version of squid.)
>
> Thanks! :)
> Paul
>
> Paul W. Henne
> Systems Engineer
> DocuTECH
> 1651 Crofton Blvd, Suite 5
> Crofton, MD. 21114
> PH-410.793.0301
> FX-410.721.6186
> CP-410.320.7670
> www.docutech.com
> phenne@md.docutech.com
>
>
> -----Original Message-----
> From: Joe Cooper [mailto:joe@swelltech.com]
> Sent: Tuesday, August 06, 2002 11:25 PM
> To: Metro
> Cc: squid-users@squid-cache.org
> Subject: Re: [squid-users] Outlook Web Access 2000 will not work with
> squid??Tried suggestions in archives, no luck...
>
> Recompiling is not necessary to add new methods.
>
> Use the extension_methods directive.
>
> For example:
>
> extension_methods SEARCH
>
> Searching the mailing list archives will reveal some other popular
> search methods (most of which will be included in 2.5STABLE by default).
>
> Metro wrote:
> > I have experinced the same problem before and someone gave me solution
> to
> > try and it work for me, you can try too
> > insert a line in file enums.h (usually at directory src/ on squid
> source
> > code)
> > METHOD_SEARCH,
> >
> > and in file url.c on *RequestMethodStr[] section insert a line
> > "SEARCH",
> >
> > note :
> > - dont forget the comma,
> > - insertion position must be same on both file (eq. both on first
> position)
> >
> > recompile squid
> > restart squid (it doesnt work with squid -k reconfigure)
> >
> > this works with squid-2.4STABLE2, and also for squid-2.4STABLE6 i'm
> > currently using.
> >
> > rgds,
> >
> >
> > ++++ cut ++++
> > ----- Original Message -----
> > From: Paul Henne
> > To: squid-users@squid-cache.org
> > Sent: Wednesday, August 07, 2002 3:50 AM
> > Subject: [squid-users] Outlook Web Access 2000 will not work with
> squid??
> > Tried suggestions in archives, no luck...
> >
> >
> > I am unable to get Outlook Web Access 2000 (via Exchange 2000 SP2) to
> work
> > with squid.
> >
> > I have tried "always_direct allow", "no_cache deny", and
> "extension_methods
> > POLL SEARCH SUBSCRIBE" (actually tried various combinations of the
> three
> > parameters for extension_methods, including just SUBSCRIBE), with no
> luck or
> > change in the end result.
> >
> > I am currently using squid 2.4.STABLE6, and will try 2.4.STABLE7
> shortly.
> >
> > A screen capture of what ends up in the browser window can be viewed
> here:
> > http://w3.mivlmd.cablespeed.com/~pwh/owa-squid.jpg
> >
> > We have several linux boxes running squid in production at several
> customer
> > sites, including a large, national one. All have reported the same
> problem.
> > At this point I have exhausted all of the ideas given on this mailing
> list
> > (except STABLE7, but we are using a squid plug-in to filter sites, and
> the
> > plug-in has not been tested on STABLE7), yet the problems persist.
> Can
> > anyone help? Does squid just not work with this version of Outlook
> Web
> > Access?? Thanks in advance...!!!
> >
> > Anxiously (and hopefully) Awaiting Replies,
> > Paul
> > ---
> > Paul W. Henne
> > Systems Engineer
> > DocuTECH
> > 1651 Crofton Blvd, Suite 5
> > Crofton, MD. 21114
> > PH-410.793.0301
> > FX-410.721.6186
> > CP-410.320.7670
> > www.docutech.com
> > phenne@md.docutech.com
> > +++++++++++++++++++++++++++
> >
>
>
>
> --
> Joe Cooper <joe@swelltech.com>
> Web caching appliances and support.
> http://www.swelltech.com
>
>
Received on Wed Aug 07 2002 - 07:57:08 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:09:32 MST