Re: [squid-users] Squid, wccp and transparent proxy

hi
 thanks for replying me
 can u tell any site where i can find this patch for solaris
 cause i search a lot but didnt got any successi
 i will be very thank full to all of u and thanks once again for
 replying me
 
 Regards
 Farrukh Mahmood
 
 
> ----- Original Message -----
> From: MASOOD AHMAD <masoodnt10@yahoo.com>
> Date: Friday, August 23, 2002 11:04 am
> Subject: Re: [squid-users] Squid, wccp and transparent proxy
>
> > Dear Farrukh
> >
> > You will have to install gre patch for decapsulation
> > because when router send wccp packets to UNIX (Linux,
> > FreeBSD, Solaris) Squid don't know what to do with
> > these packets your machine will have to decapsulate
> > these packets so please install gre patch then your
> > wccp enables proxys will work
> >
> > Regards
> >
> > Masood Ahmad Shah
> > Asst System Admin
> > www.softel.net.pk
> >
> >
> >
> > --- Farrukh Mahmood <farrukh_mahmood@eworld.net.pk>
> > wrote:
> > > hi to all
> > >
> > > well i m littel bit new to squid, i got some problem
> > > after intallling
> > > and configuring squid which are
> > >
> > > 1. when i run squid as tranparent proxy i got
> > > folling errors
> > >
> > > a.parseHttpRequest: NAT lookup failed:
> > > ioctl(SIOCGNATL)
> > >
> > > b. clientReadRequest: FD 638 Invalid Request
> > >
> > > c. WARNING! Your cache is running out of
> > > filedescriptors
> > > clientSendMoreData: Deferring
> > > http://64.4.13.172/gateway/ga
> > >
> > > my configuration for transparent proxy is
> > >
> > > solaris 7
> > > squid 2.4 stable5
> > > ipfilter ip_fil3.4.14-sol7-64.pkg
> > >
> > > squid.conf
> > > ===========
> > >
> > > http_port 8080
> > > httpd_accel_host virtual
> > > httpd_accel_port 80
> > > httpd_accel_with_proxy on
> > > httpd_accel_uses_host_header on
> > >
> > > ipnat.conf
> > > ===========
> > > > rdr hme0 a.b.c.e/0 port 80 -> a.b.c.f port 80
> > > tcp
> > > > rdr hme0 a.b.c.d/0 port 80 -> a.b.c.f port 80
> > > tcp
> > > > rdr hme0 0.0.0.0/0 port 80 -> a.b.c.f port
> > > 8080 tcp
> > >
> > >
> > > ipf.conf
> > > ========
> > > pass all in
> > > pass all out
> > >
> > >
> > > router
> > > ======
> > > access-list 104 deny tcp host a.b.c.f any eq www
> > > access-list 104 permit tcp a.b.c.0 0.0.0.255 any
> > > eq www
> > > access-list 104 permit tcp a.b.c.e 0.0.0.255 any
> > > eq www
> > >
> > > !
> > > route-map trans-proxy1 permit 10
> > > match ip address 104
> > > set ip next-hop a.b.c.f
> > > !
> > > Then put the policy on the interface:
> > > interface FastEthernet0/0
> > > description NOC-BORDER GATEWAY INDONESIA-US
> > > ip address a.b.c.g 255.255.255.0
> > > no ip directed-broadcast
> > > no ip mroute-cache
> > > ip policy route-map trans-proxy1
> > >
> > >
> > >
> > > 2. when i run squid with wccp the router send the
> > > packets but squid
> > > didnt fullfills the packets request
> > > my configuration for squid with wwcp is following
> > >
> > > squid.conf
> > > ===========
> > > http_port 8080
> > > httpd_accel_host virtual
> > > httpd_accel_port 80
> > > httpd_accel_with_proxy on
> > > httpd_accel_uses_host_header on
> > > wccp_router "router_ip"
> > > wccp_outgoing_address "squid_server_ip"
> > > wccp_version 3
> > >
> > >
> > > i got 2600 series router and ios is 12(5)T
> > >
> > > so can any body tell what i m missing or is there
> > > any patch or package
> > > i have to install for wccp
> > >
> > > i will be very thank full to u if u help
> > >
> > > Regards
> > > Farrukh Mahmood
> > >
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Finance - Get real-time stock quotes
> > http://finance.yahoo.com
> >
>
Received on Sat Aug 24 2002 - 10:24:41 MDT