RE: [squid-users] Delay pools explained ??

From: Rabie van der Merwe <[email protected]>
Date: Thu, 5 Dec 2002 13:46:59 +0200

Would I then be correct in assuming that class 1 is more for
when one wants to apply separate limits to separate machines,
for instance if you have a parent cache and you would like to
specify how much bandwidth each child gets based on the link speed
it has to parent i.e. I have 5 children with line speed 64, 128, 196
256 etc I would use a 5 class one pools?

Is there a limit on the amount of pools one can create, and I suppose
the more pools you have the bigger the overhead (mostly memory)?

Thanks for all the help so far, I now have a working setup with delay
pools.

Regards
Rabie

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: 05 December 2002 01:18
To: Rabie van der Merwe
Cc: squid-users@squid-cache.org
Subject: RE: [squid-users] Delay pools explained ??

tor 2002-12-05 klockan 11.37 skrev Rabie van der Merwe:
> What would you then do if say you had two class B's that you wanted to
> rate limit, can you use the same pool, or would you have to create a
> seperate pool per 16bit network? Or say you had 3 24bit networks would
> you then say eiter create one class 3 pool for all 3 or 3 class 2 pools
> one for each network?

If you have more than one class B networks where the last 16 bits may
overlap significantly then you should create multiple class 3 pools. If
the same last 16 bits are very unlikely to be used concurrently in more
than one network then you may get by with only one pool.

For the multiple 24bit networks it is up to you if you create multiple
class 2 pools or one large class 3 pool.

Creating multiple pools is needed if you want to apply different
settings to different networks.

class 2 uses the last 8 bits of the client IP address as "user
identity".

class 3 uses the last 16 bits of the client IP address as "user
identity".

And in addition to the aggregate and per user limits class 3 pools also
have network pool limits which works like the aggregate pool limits but
apply to the 24 bit networks. A class 3 pool has 256 networks of 256
client IP addresses, based on the last 16 bits of the client IP address.

Regards
Henrik

**********************************************************************
                                ------
                                NOTICE
                                ------
This message contains privileged and confidential information intended
only for the person or entity to which it is addressed.

Any review, retransmission, dissemination, copy or other use of, or
taking of any action in reliance upon this information by persons or
entities other than the intended recipient, is prohibited.

If you received this message in error, please notify the sender
immediately by e-mail, facsimile or telephone and thereafter delete the
material from any computer.

Metropolitan Health Group, its subsidiaries or associates
do not accept liability for any personal views expressed in
this message.

**********************************************************************
Received on Thu Dec 05 2002 - 04:48:20 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:11:51 MST