Re: [squid-users] Split trafiic over two interfaces

That wouldn't be a problem at all.
Thanks to make it clear for me!

Regards,
Sander Winkel

----- Original Message -----
From: "Henrik Nordstrom" <hno@squid-cache.org>
To: "Sander Winkel" <s.winkel@roc-teraa.nl>
Cc: "Shalkebaev,AntonMSCAG" <ShalkebaevA@msc.xm.mitsui.co.jp>;
<squid-users@squid-cache.org>
Sent: Friday, March 21, 2003 4:18 PM
Subject: Re: [squid-users] Split trafiic over two interfaces

> Yes, this can be done with tcp_outgoing_address, but as I said
> previously you also need to play a little with advanced routing to route
> the outgoing packets to the correct provider. Normally routing only
> cares about the destination address, so even if Squid has selected an
> address belonging to the secondary provider your server (or router) will
> still try to route it via the single default gateway..
>
> Regards
> Henrik
>
> fre 2003-03-21 klockan 15.36 skrev Sander Winkel:
> > We have two providers, one is faster than the another one.
> > We want to transfer all requests for small things like images over the
> > slowest line and all other requests over the another line.
> > So I had the hope something could be done with tcp_outgoing_address or
> > something...
> >
> > Regards,
> > Sander Winkel
> >
> >
> > ----- Original Message -----
> > From: "Shalkebaev,AntonMSCAG" <ShalkebaevA@msc.xm.mitsui.co.jp>
> > To: "'Sander Winkel'" <s.winkel@roc-teraa.nl>;
<squid-users@squid-cache.org>
> > Sent: Friday, March 21, 2003 1:46 PM
> > Subject: RE: [squid-users] Split trafiic over two interfaces
> >
> >
> > > It is not possible :)
> > > Why you would like to do it.
> > >
> > > -----Original Message-----
> > > From: Sander Winkel [mailto:s.winkel@roc-teraa.nl]
> > > Sent: Friday, March 21, 2003 02:51
> > > To: squid-users@squid-cache.org
> > > Subject: [squid-users] Split trafiic over two interfaces
> > >
> > >
> > > I want to split traffic over two interfaces with acls.
> > > For example, I want to send all requests for images to 192.168.0.1 and
all
> > > other traffic to 192.168.0.2
> > > I've look to tcp_outgoing_address but that don't helps me well.
> > > I thought it was possible to do that with squid, isn't it?
> > >
> > > Regards,
> > > Sander Winkel
> --
> Henrik Nordstrom <hno@squid-cache.org>
> MARA Systems AB, Sweden
>
Received on Fri Mar 21 2003 - 10:20:47 MST