Squid-2.5 can accelt https requests. See the https_port directive.
However, it will fetch the requested URLs using http, not https. To be
able to make Squid fetch https:// in proxy mode (not tunnel mode as in
normal "forward" proxying of SSL) you need to patch your Squid with an
SSL update, and use a redirector to adjust the relevant URLs back into
https://... ("http_accel_port virtual" sometimes makes this easier).
Note: All the required functionality will be in Squid-3, but Squid-3 is
currently under active development and not exacly suitable for
production use.. (but you are very welcome to try using Squid-3 in a lab
environment).
Regards
Henrik
ons 2003-04-16 klockan 15.07 skrev Alexandre:
> hi all
> i making a squid in a reverse mode and need to configure then to cache
> many web servers with http and https protocol.
> is possible ?
> Just with http its ok
> but https i dont know
> any one can help me ?
> thanks
>
> Alexandre
-- Free Squid-users support provided by Henrik Nordstr�m <hno@squid-cache.org> Donations welcome if you consider my Free Squid support helpful. https://www.paypal.com/xclick/business=hno%40squid-cache.org If you need commercial Squid support or cost effective Squid and firewall appliances please refer to MARA Systems AB, Sweden http://www.marasystems.com/, [email protected]Received on Wed Apr 16 2003 - 09:23:13 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:15:00 MST