On Wednesday 30 April 2003 14.28, Sukhjit Singh wrote:
> Dear all am stuck up with monitoring squid+wccp with mrtg, not able
> to do that....kindly give your expert views for the monitoring of
> squid with mrtg.
How far have you got?
1. Compile Squid with --enable-snmp and install mrtg.
2. Set up snmp_port and snmp_access in squid.conf.
3. Create a suitable mrtg.conf using the examples found on the
Internet as starting point. Do not forget to include the Squid
mib.txt file from mrtg.conf.
4. Run mrtg manually to verify it finds all the requested elements and
is able to talk to Squid.
5. Set up a cron job to have mrtg called every 5 minutes to collect
the needed information from Squid.
6. If you are not fully happy with your graphs, tweak your mrtg.conf
until you have the graphs you are looking for.
Regards
Henrik
-- Donations welcome if you consider my Free Squid support helpful. https://www.paypal.com/xclick/business=hno%40squid-cache.org If you need commercial Squid support or cost effective Squid or firewall appliances please refer to MARA Systems AB, Sweden http://www.marasystems.com/, [email protected]Received on Thu May 01 2003 - 12:09:28 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:16:08 MST