RE: [squid-users] cache_swap_low and high waternmark

Hi, Henrik

I am using Squid.2.5.STABLE2 on RedHat 7.3 with DISKD for io.
Even if I hit with 30 req/s to squid, still i am able to see on an
avrage 5 sec. pause in store.log file.

I am running out of ideas with this problem.
Thank you
Jigar

-----Original Message-----
From: Jigar Rasalawala
Sent: Friday, May 02, 2003 9:36 AM
To: Henrik Nordstrom; squid-users@squid-cache.org
Subject: RE: [squid-users] cache_swap_low and high waternmark

Hi, Henrik

Thanks for reply. I am not exactly SNMP guy. but I talked
to my collegue at work he knows SNMP very well. I passed this
information to him. He will send you corrected copy of mib file.

I think this would be ok with you.
Jigar

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: Friday, May 02, 2003 2:38 AM
To: Jigar Rasalawala; squid-users@squid-cache.org
Subject: Re: [squid-users] cache_swap_low and high waternmark

On Friday 02 May 2003 03.38, Jigar Rasalawala wrote:

> Two snmp object that Squid supports seam to reach a numeric value
> and then start going backwards. The two Objects are:
>
> .1.3.6.1.4.1.3495.1.3.1.7.0 = Counter32:

enterprises.nlanr.squid.cachePerf.cacheSysPerf.cacheNumObjCount

this is a gauge, not a counter. It will mainly grow until the cache
has been filled, once filled it will go up and down a little.

> .1.3.6.1.4.1.3495.1.3.1.9.0 = Counter32:

enterprises.nlanr.squid.cachePerf.cacheSysPerf.cacheCurrentUnlinkRequests

This too is a gauge... indicates how many cache objects Squid is
currently deleting from the cache. The higher load your Squid cache
is having the higher this value will get, and then decline back to 0
when the cleaning process manages to catch up.

Both these objects should be returned as Gauge32 values, not
Counter32. Thanks for the notification on this error in the Squid
SNMP MIB.

A quick inspection of the MIB revealed a few other values with the
same error. I don't have the time to do a full review of the MIB now,
and would be thankful if someone else could do this:

 * Read the Squid mib.txt, and for each value consider if the SYNTAX
type is correct for the type of value described and if the value
description makes sense.

 * If the syntax type does not match, please indicate what syntax the
value should be using.

 * If the description does not make sense, try to write a better
descripiton. For help on finding out what the value actually is when
writing this description consult squid-dev@squid-cache.org.

 * If would also be good if you could verify that the types returned
by Squid matches what is documented in mib.txt.

Then sumbit your suggestions on MIB updates as a Squid bug to the bug
database, or post them to squid-dev@squid-cache.org.

Regards
Henrik

-- 
Donations welcome if you consider my Free Squid support helpful.
https://www.paypal.com/xclick/business=hno%40squid-cache.org
If you need commercial Squid support or cost effective Squid or
firewall appliances please refer to MARA Systems AB, Sweden
http://www.marasystems.com/, [email protected]