Re: [squid-users] redirect from http to https

From: Henrik Nordstrom <[email protected]>
Date: Sun, 3 Aug 2003 18:13:43 +0200

On Sunday 03 August 2003 17.15, Andrew wrote:
> I have squid set up in accelerator mode in front of my web server.
> I would like to ensure that users access some of the content on the
> web server using https. I tried the example in the squid FAQ just
> to see if it would work but it didn't. With the redirection script
> in place, my browser spins until a message comes up saying that the
> maximum redirection limit was reached

Most likely your redirect script witks a bit too well... redirecting
https:// accesses as well.

Squid-2.5 has the peculiar limitation that requests accepted by
https_port will internally be processed as http:// requests, meaning
that http:// is sent to redirectors etc.

What you can do to differentiate http_port from https_port in
squid-2.5 is to enable httpd_accel_port virtual, then look for the
port number in your redirector, clean up the url etc.

Another option is to look into Squid-3.0 where this is a whole lot
easier and does not require a redirector helper.

Regards
Henrik

-- 
Donations welcome if you consider my Free Squid support helpful.
https://www.paypal.com/xclick/business=hno%40squid-cache.org
If you need commercial Squid support or cost effective Squid or
firewall appliances please refer to MARA Systems AB, Sweden
http://www.marasystems.com/, [email protected]
Received on Sun Aug 03 2003 - 10:14:19 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:18:33 MST