Re: [squid-users] Dial Access Server & Squid

Pada 14-Aug-2003, Adam Aube menulis:
> > But alas, even after setting the browser to use 10.1.1.1 as its proxy
> > server, and even ping can be done from both sides (from client and
> > from the proxy), I still [can't] surf internet from a dial access...
>
> First thing to figure out is if this is a Squid problem or a
> networking problem.

> Step 1:
>
> Try to telnet to the IP and TCP port that Squid runs on. If you get a
> connection, type "HEAD" and hit enter twice. You should get an error
> message from Squid that starts like this:
>
> HTTP/1.0 400 Bad Request
> Server: squid/[version]

I haven't made some try yet, but I will and will tell you what

> Step 2:
> Use both ping and the Squid client to see if you can connect to the
> Internet.

>From dialling client, right ?
ping worked but squid client didn't

> If either step 1 or 2 fails, then this probably isn't a Squid problem.

Hmm ok

> If both Step 1 and 2 succeed, then check your Squid acls - especially
> any that control access by source IP address.

I think I already allow all clients coming from our IP address range..

> Adam

Thanks
aqil
Received on Thu Aug 14 2003 - 21:09:23 MDT