Re: [squid-users] Help with LDAP authentication

You could always look into upgrading the RedHat Source RPM to rebuild
a newer binary RPM.

Regards
Henrik

On Thursday 11 September 2003 18.24, you wrote:
> One more thing, you mentioned upgrading to Stable3. Forgive me,
> but where I am using Redhat9, I'm a bit of a neophite when it comes
> to installing programs with using rpm's. I don't seem to be able
> to find a rpm for stable3. I have downloaded STABLE3 in the tar
> format, and am perfectly capable of installing using ./configure
> make all and make install. However, it does put the program in a
> different location than where Redhat defaults the other one. Any
> suggestions on either removing the other one or getting the
> ./configure to put it in the same location as the original?
>
> Thanx!
>
> Christopher J. Joles
> Chief Information Officer
>
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Thursday, September 11, 2003 9:08 AM
> To: Christopher Joles
> Cc: squid-users@squid-cache.org
> Subject: Re: [squid-users] Help with LDAP authentication
>
> tor 2003-09-11 klockan 14.46 skrev Christopher Joles:
> > For the record, I am using a RedHat 9 install, with squid that
> > was installed by default. I believe it is 2.5Stable1.
>
> You probably want to upgrade, at least if you plans on using
> groups.
>
> > Now, again with that said, I have successfully communicated with
> > the ldap box with ldap search using the following syntax:
> >
> > Ldapsearch -x -h 192.168.0.123 -b dc=proteabhs,dc=com -D
> > cn=squiduser,cn=Users,dc=proteabhs,dc=com -w *********
>
> Good.
>
> > I have sucessfully communicated with squid_ldap_auth with the
> > following syntax:
> >
> > Squid_ldap_auth -p -R -b dc=proteabhs,dc=com -D
> > cn=squiduser,cn=Users,dc=proteabhs,dc=com -w ********* -f
> > sAMAccount=%s objectClass=Person -h 192.168.0.123
>
> Ok.
>
> > Now, with that all out of the way, I have put the same syntax
> > into my squid.conf file and when I try to browse the net, I do
> > receive the login box, however, my password is never accepted.
> > It loops 3 times and then displays the default page stating that
> > I must authenticate prior to accessing the page.
>
> The exact same syntax should work, unless you needed to use some
> quotes. If you needed to quote arguments then you need to upgrade
> Squid or put the command line in a small shell script.
>
> > I know from the command line, all is working fine. It must be a
> > syntax issue, however ,from what I can tell I'm entering it all
> > correctly.
>
> So what did you enter into squid.conf?
>
> Regards
> Henrik
Received on Thu Sep 11 2003 - 13:11:05 MDT