[squid-users] HELP WCCP Router 7200 Series

Dear all,

I've a problem to setting up My Router and proxy.
The specify our machine is:
1. The Router 7200 Software (C7200-IS-M), Version 12.2(17a)
IP-> 10.10.10.1
2. Proxy using RH 7.0 with squid 2.5stable2, with patch for ip_wccp
(with 1 interface ethernet)
IP-> 10.10.20.2

Here is my config in the router :
clock timezone GMT+7 7
ip subnet-zero
no ip source-route
ip wccp version 1
ip wccp web-cache redirect-list testWCCP group-list 20
ip cef
!

The result was:
Global WCCP information:
    Router information:
        Router Identifier: 10.10.10.1
        Protocol Version: 1.0
    Service Identifier: web-cache
        Number of Cache Engines: 1
        Number of routers: 1
        Total Packets Redirected: 11
        Redirect access-list: testWCCP
        Total Packets Denied Redirect: 0
        Total Packets Unassigned: 0
        Group access-list: 20
        Total Messages Denied to Group: 4
        Total Authentication failures: 0

WCCP Cache-Engine information:
        Web Cache ID: 0.0.0.0
        Protocol Version: 0.4
        State: Usable
        Initial Hash Info: 00000000000000000000000000000000
                               00000000000000000000000000000000
        Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                               FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Hash Allotment: 256 (100.00%)
        Packets Redirected: 3
        Connect Time: 00:00:37

    WCCP Routers Informed of:
        -none-

    WCCP Cache Engines Visible:
        10.10.20.2

    WCCP Cache Engines NOT Visible:
        -none-

I've already redirect the packet from port www to 3128:
  iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128

When i install squid :
  ./configure --prefix=/usr/local/squid --enable-async-io --enable-storeio=diskd,ufs -enable-wccp -enable-underscores --enable-linux-netfilter
  make all install

In my squid.conf i've already config this :
wccp_router
httpd_accel_host
httpd_accel_port
httpd_accel_with_proxy
httpd_accel_uses_host_header

I've also enable IP Forwarding by editing /etc/sysctl.conf with:
net.ipv4.ip_forward = 1
net.ipv4.conf.all.rp_filter = 1
kernel.sysrq = 0

The problem is my client can't detect the proxy (where i was setting
as transparent proxy) and he cannot browsing, but if the client using
manual proxy, it's ok....

Thanks in advance for any help
Received on Fri Oct 10 2003 - 03:41:55 MDT