RE: [squid-users] RE: Sample squid.conf

From: Milind Nanal <[email protected]>
Date: Thu, 6 Nov 2003 15:38:51 +0530

Hi Henrik,

I have added OS kernel support for WCCPv2. When I checked wccp status on
router, it shows that router identifies the cache engine's presence over
there.

But still ......problem....

When squid service is started cache.log file generates.
Below is the cache.log generated by squid.

2003/11/06 14:34:23| Ready to serve requests.
2003/11/06 14:35:23| Incoming WCCP v2 I_SEE_YOU length 176.
2003/11/06 14:35:23| Incoming WCCP2_I_SEE_YOU received id = 50862.
2003/11/06 14:35:23| Incoming WCCP2_I_SEE_YOU member change = 1 tmp=66.

No data logs in access.log & store.log files.
Further guidance is required..

Regards,

Milind
-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: Tuesday, November 04, 2003 9:01 PM
To: Milind Nanal
Cc: Henrik Nordstrom; squid-users@squid-cache.org
Subject: Re: [squid-users] RE: Sample squid.conf

Squid FAQ 17.11 WCCP - Web Cache Coordination Protocol
<url:http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.11>
Describes WCCPv1 setup, but most are the same except for wich patch and
kernel driver to use, and some minor differences in IOS settings.

Squid WCCP Version 2.0 Support project
<url:http://devel.squid-cache.org/projects.html#visolve_wccpv2>
Provides WCCPv1 like functionality using WCCPv2 which broadens the IOS
compability with newer IOS releases. Installation instruction can be
found from the authors web site (linked).

Regards
Henrik

On Tue, 4 Nov 2003, Milind Nanal wrote:

>
>
> More detail help, URL, document ref is appreciated.
>
> Regards,
>
> Milind
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Tuesday, November 04, 2003 2:11 PM
> To: Milind Nanal
> Cc: hno@squid-cache.org; squid-users@squid-cache.org
> Subject: Re: Sample squid.conf
>
>
> On Tue, 4 Nov 2003, Milind Nanal wrote:
>
> > Any one can send back the sample squid.conf for WCCP 2 support with my
> Squid
> > box acting as child for Cisco cache acting as parent.
>
> The hard parts to configure is outside squid.conf
>
> * OS kernel support for WCCPv2
> * OS kernel support for interception of TCP sessions
>
> Regards
> Henrik
>
Received on Thu Nov 06 2003 - 03:08:56 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:21:09 MST