RE: [squid-users] Squid WCCP issue

Using the default rpm from RedHat probably won't work.

Try Compiling squid from the source, as follows:

./configure --prefix=/usr/local/squid --mandir=/usr/share/man
--enable-async-io --enable-wccp --enable-linux-netfilter

-----Original Message-----
From: Kevin Morland [mailto:kmorland@mac.com]
Sent: Tuesday, November 25, 2003 5:19 PM
To: squid-users@squid-cache.org
Subject: [squid-users] Squid WCCP issue

Hello, I have searched the web and the squid site for day looking for
an answer to the problem.

I am trying to implement transparent cache server. I have a cisco 3640
and an redhat server. I have compiled the ip_wccp kernel module and
have it loaded. I have the default RPM from Red Hat for squid.

The problem is the router recognizes the cache-engine at the IP,
however it reports unusable. Here is the result of show ip wccp
web-cache detail:
WCCP Cache-Engine information:
         IP Address: 206.253.190.4
         Protocol Version: 0.4
         State: NOT Usable
         Initial Hash Info: 00000000000000000000000000000000
                                00000000000000000000000000000000
         Assigned Hash Info: 00000000000000000000000000000000
                                00000000000000000000000000000000
         Hash Allotment: 0 (0.00%)
         Packets Redirected: 0
         Connect Time: 00:00:15

I do not know where to look for the problem, I have searched and tried
everything I can think of. The only thing I noticed was that gre as no
packets running ifconfig -a. I have also redirect the traffic with
iptables.

Any help or suggestions would be most helpful.

Thanks,
Kevin Morland
Received on Tue Nov 25 2003 - 15:59:05 MST