[squid-users] Squid Configuration

Hello, I have just installed Linux Red Hat 9 on an intel microprocessor
(Pentium Celeron 300 Mhz , 256 Mb of RAM and 60 Gb UATA IDE DISK) and i
have a network with 10 pcs connected I turn squid on and it works fine
but when i make a simple ping from any computer connected to the linux
server ( for example ping www.google.com.ar, it gives me host unknown).

The Linux configurations are these:

device hardware ip/nm

eth0: rtl8139 10.0.0.1/255.0.0.0
eth1: rtl8139 192.168.0.1/255.255.255.0
eth2: rtl8180 (wlan) 192.168.1.1/255.255.255.0
ppp0: ADSL PPPoE using eth0

the inner network is connected to eth1 device and it works fine (i'm
using samba) but squid doesn't work properly.
I give you the squid.conf file because i can't find the error in this.

Thank so you much
Regards
Guillermo Nardoni from Argentina.
Received on Thu Aug 19 2004 - 13:12:49 MDT