[squid-users] visolve patch for wccpv2 support

Hi all,
          I applyed the Visolve patch for Squid2.5 ( to enable Wccpv2 on
Squid )
and now I'm trying to configure and compile Squid2.5 ... I'm trying because
I have a problem.

Here what I've done :

1) tar xvzf squid-2.5.STABLE5-icap-6-pre3.tar.gz ( these Squid sources
are patched with ICAP support )

2) patch -p1 < /squid-w2/squid-2.5.STABLE5-icap-6-pre3/visolve_wccpv2-s2_5.patch
 ( I patched Squid sources with the
Visolve-patch for Wccpv2 support )
When I applyed this patch I had the messages :

patching file acconfig.h
Hunk #1 succeeded at 119 (offset 7 lines).
patching file configure.in
patching file src/Makefile.am
Hunk #1 succeeded at 32 (offset 6 lines).
Hunk #2 succeeded at 110 (offset 7 lines).
Hunk #3 succeeded at 211 (offset 8 lines).
patching file src/cf.data.pre
Hunk #1 succeeded at 3420 (offset 305 lines).
Hunk #3 succeeded at 3460 (offset 305 lines).
patching file src/cf_gen_defines
Hunk #1 FAILED at 18.
1 out of 1 hunk FAILED -- saving rejects to file src/cf_gen_defines.rej
patching file src/main.c
Hunk #1 succeeded at 297 (offset 5 lines).
Hunk #3 succeeded at 349 (offset 5 lines).
Hunk #4 succeeded at 391 (offset 16 lines).
Hunk #5 succeeded at 549 (offset 11 lines).
Hunk #6 succeeded at 987 (offset 22 lines).
patching file src/protos.h
Hunk #1 succeeded at 571 (offset 1 line).
patching file src/structs.h
Hunk #1 succeeded at 467 (offset 23 lines).
patching file src/wccpv2.c

3) So I applyed manually the source code in the file src/cf_gen_defines.
I added that line :

        define["USE_WCCPv2"] = "--enable-wccpv2"

4) I had also to add in the file configure the lines :

ac_help="$ac_help
  --enable-wccpv2 Enable Web Cache Coordination V2 Protocol"

# Check whether --enable-wccpv2 was given.
if test "${enable_wccpv2+set}" = set; then
  enableval="$enable_wccpv2"
   if test "$enableval" = "yes" ; then
    echo "Web Cache Coordination Protocol V2 enabled"
    cat >> confdefs.h <<\EOF
#undef USE_WCCPv2 1
EOF

  fi

fi

5) ./configure --prefix=/usr/local/squid --enable-icap-support --enable-wccp2

6) make all

Everything seems to be OK but instead of compiling wccpv2.c was compiled
wccp.c . I made many tests but I can't be able to compile wccpv2.c .
Infact in /include/autoconf.h there is :

/*
 * Define to enable WCCP
 */
#define USE_WCCP 0 --> and non USE_WCCPv2

and the comand "make all" displays on the video the creation of wccp.o .

Some other information :

Linux Distribution: Red Hat 9
Kernel version: 2.4.20-20.9

Is there anyone who can help me ????
Regards
Andrea
Received on Fri Feb 11 2005 - 09:32:22 MST