RE: [squid-users] HTTP and FTP control through Squid

 
>
> Hi all,
>
> First, I would like to define our setup: We have 2 Linux
> Servers, the 1st
> Server sits on the center of the LAN which do firewalling and
> natting. This
> Linux server has 2 NIC (eth1 connects to the internet and
> eth0 connects to
> LAN) all port 80 request are redirected to port 8080 (to 2nd
> Server) via
> eth0 and the rest directly to the internet via eth1.
>
> As I mention when the request is port 80 the 1st Server
> redirected it to
> port 8080 which is the 2nd Server. This 2nd server is the
> Squid cache/proxy
> server, this 2nd server also have 2 NIC (eth1 connects to
> the internet and
> eth0 connects to LAN).
> AS you can see the connection of server1 and server 2 is via
> eth0 and both
> have there own connection to the internet.
>
> I have 3 local blocks (192.168.10.0/24, 192.168.11.0/24,
> 192.168.12.0/24),
> Im giving each IP address 128kbps downstream and 64kbps upstream.
>
> My questions:
> 1. Is there a way for Squid to limit the http and ftp bandwitdh
> specifically? This is how Im planning to do this, if the
> page or a file is
> already cached so the cache server can serve it to everyone with no
> bandwitdh limit, but if the page or file is not yet cache
> then the bandwidth
> limits applies. The http request should be 64kbps CAR but if
> the network is
> not heavy loaded they go up to 128 kbps. Fot the ftp it
> should be 10kbps to
> 30kbps. We would highly apprciate it If you can give us
> examples on doing
> this.
>
 
  http://www.squid-cache.org/Doc/FAQ/FAQ-19.html#ss19.8

  M.
Received on Sun Apr 17 2005 - 23:44:03 MDT