Hi
I have spent the last few months getting Squid to work seamlessly in a Windows 2003 AD environment. Being an MCSE I had very little *NIX knowledge but I had to try Squid out as ISA was not an option.
I would like to share my configuration with others so hopefully I can provide the same help I received. I make no guarantees, this is not a complete how-to, it's just what I did to get things running in my particular environment with the software versions specified. There is much improvement to be made and a great deal for me to learn, but this is working just fine at the moment.
Please please try this in a test environment first. I was dumb enough not to do so and ended up killing a production DC when trying to join the squid machine to the domain. An error in smb.conf over-wrote the DC's computer account in AD! Oops. I just treated the situation as if the DC had an unrecoverable hardware failure. Following an MS article, I removed the DC from AD by hand and rebuilt it under a new name. I felt this was the only way to be sure, and everything is back to normal now! Won't be forgetting that in a hurry; what doesn't kill you (or the network) can only make you stronger! :-P
So here we go : - )
Hardware
��������
HP Netserver LC 2000 U3
Pentium III/1000Mhz
512MB RAM
1x18GB SCSI drive
2x36GB SCSI drive
I created two RADI0 volumes, one with one disk and one with two disks. This favours performance over fault-tolerance.
Software
��������
FreeBSD 6.0-RELEASE http://www.freebsd.org/
Squid 2.5 STABLE12 http://www.squid-cache.org/
Samba 3.0.21a http://www.samba.org/
Windows 2003 SP1 Active Directory environment
Operating System setup
����������������������
FreeBSD was loaded with standard partitions (/ /var /usr and swaps) on the first disk. I created one large partition mounted /disk1 for the cache on the second disk. The OpenLDAP libraries from the ports collection are required to communicate with AD. You can use sysinstall during installation or later to install this. Configure, Packages, Select Media, Net, openldap-client-2.2.27. Next came the user and group accounts to run squid under. These were called proc_squid and grp_squid and created in the normal way as per the handbook. To allow use of the cache manager, Apache 1.3 was installed from /usr/ports/www/apache13/
Samba
�����
Samba is required to facilitate transparent NTLM authentication. Only winbind ends up running so it seems overkill to install the whole package. Follow the installation instructions and make sure to add
--with-winbind --with-ads
when you run the configure script. If you get errors that relate to LDAP not being installed you can specify where the libs are like this. I imagine this will vary between OSs, this is what FreeBSD required.
--libdir=/usr/local/lib/
--includedir=/usr/local/include/
You can use the smb.conf at the bottom of this page as a guideline for your own to get Samba running. An excellent FAQ is located at http://www.squid-cache.org/Doc/FAQ/FAQ-23.html which describes testing procedures. The only program I used from Samba was ntlm-auth which in turn relies on winbindd to function. This will authenticate the user transparently and pass the details of the account to Squid via the external helpers setup. Rather more info than you need (!) can be found here http://us1.samba.org/samba/docs/man/Samba-HOWTO-Collection/winbind.html
There is also an excellent guide regarding Samba and squid here.
http://pserver.samba.org/samba/docs/man/Samba-Guide/DomApps.html
The squid machine has to be joined to the AD domain, and you can do this with the following command
/usr/local/samba/bin/net ads join -U administrator%password
While you are in AD U+C checking the account is OK, you might as well create the account which the LDAP program will use to authenticate. Just a regular user account with no access will do just fine. Use the credentials when constructing the squid_ldap_group command line as detailed below.
There is a section in one of the FAQs about using a cron job to cycle the computer account password every so often. It's not obvious whether this is required or not, I certainly haven't had to do it yet. However, if the authentication should break down unexpectedly, it's one of the first things I will look at!
I encountered various different errors here and a summary follows
BH NT_STATUS_ACCESS_DENIED
[2005/12/14 14:12:09, 0] utils/ntlm_auth.c:winbind_pw_check(439)
Login for user [DOMAIN]\[USER]@[SQUIDTEST] failed due to [winbind
client not authorized to use winbindd_pam_auth_crap. Ensure permissions on
/var/db/samba/winbindd_privileged are set correctly.]
The permissions on /var/db/samba/winbindd_privileged is not set correctly
The directory I had to check was /usr/local/samba/var/locks/winbindd_privileged/
User: root or cache_effective_user
Group: cache_effective_group
Permissions: o=rwx, g=rx, o=
Then everything was OK.
squidhp# ./ntlm_auth --helper-protocol=squid-2.5-ntlmssp
squid\administrator password
[2006/02/01 10:23:18, 1] utils/ntlm_auth.c:manage_squid_ntlmssp_request(578)
BH
Above is an example of testing the ntlm_auth program. I never got this to work properly by hand, but squid seems happy with it! It's an error that doesn't need fixing.
You will be ready to proceed if you are at the following position
winbindd running (use winbinnd -D to invoke)
wbinfo -t returns 'secret is good' or 'checking the trust secret via RPC calls succeeded'
wbinfo -g return a list of your groups something like
DOMAIN\domain guests
DOMAIN\domain users
DOMAIN\group policy creator owners
etc....
wbinfo -u does the same as above for users
Squid
�����
Squid is now ready to be loaded. You must use
--enable-auth="basic,ntlm"
--with-external-acl-helpers="ldap_group"
There was a major problem with getting the ldap group program to compile properly. It couldn't find the ldap libraries even though I tried to specify them in the Makefile file. I ended up copying all the files related to ldap so there was a copy in both /usr/include/ and /usr/local/include. This was pretty messy but I did not have another option at the time. The error message
cannot find -lldap
also came up a few times. This was sorted by editing this file
../squid-2.5.STABLE12/helpers/external_acl/ldap_group/Makefile
The variable LDFLAGS must read
LDFLAGS = -g -L/usr/local/lib
Squid should compile with no errors and a squid_ldap_group executable should be created in the external helpers ldap_group directory
It's a good idea to test squid_ldap_group by hand at this point. The manual pages and help switch are useful. Here is the command line extracted from squid.conf
/squid-2.5.STABLE12/helpers/external_acl/ldap_group/squid_ldap_group -b "ou=example_OU,dc=example,dc=domain,dc=com" -f "(&(cn=%a)(member=%v)(objectClass=group))" -F "(|(samAccountName=%s)(cn=%s))" -h DC_hostname.example.domain.com -D username -w password -v3 -S
Entering a username and then a group separated by a space will return either OK or ERR depending on their membership. It appears that the program is more than just a membership lookup routine. Through testing, I discovered that each filter must evaluate to true for OK to be returned. So you can customize them to whatever criteria you like. The example above checks for a group with the user present in it and the fact that the user exists. It also checks the base OU specified and the whole tree beneath it.
All that was left was to take ownership of the appropriate directories, create the cache folders (I created /disk1/squid/var/cache/ ) and start winbindd and squid.
I used chmod and chown with -R to recursively set ownership and permissions for the cache directories and the other two squid folders. This may be overkill.
/usr/local/squid/sbin/squid -z will initialise the cache folders
/usr/local/squid/sbin/squid -NCd1 is good for the first time you start as it will send debugging messages straight to the console. Just run ../squid on it's own when you are happy for squid to run in the background.
Samba documentation says you need smbd and nmbd but I found that it worked without either of them. I read a few documents that mentioned NSSWITCH and KRB5 configuration files but I never created or modified either of these.
If you see multiple ntlm_auth and squid_ldap_group processes this is normal. 5 processes are spawned by default to ensure all requests are handled efficiently. My server is very very quiet at the moment (0.8% CPU usage on average, 23 users) so I have reduced this to 3 processes for the moment. This is specified in squid.conf under auth_param ntlm children n. I feel that squid performance is crucial and hope to investigate this area further.
Squid ACLS
����������
My setup includes three groups of users. Those with no restriction whatsoever, those whose must pass a blacklist and those who must pass a whitelist. You can see how this was implemented from the squid.conf below. The cunning thing about this syntax is that if a user is accidentally joined to more than one of the internet groups in AD, the most restrictive group will apply. There is also system wide blocking for ads and unapproved subnets. Note the line 'acl auth_users proxy_auth REQUIRED' which ensures that any user connecting must undergo authentication. I have left out Basic as the only clients that will be connecting are IE and Firefox. Firefox 1.5 appears to support NTLM now, which is contrary to some articles I have read. There were no pop-ups and it worked transparently just as IE does.
Custom Error Messages
���������������������
I have also created some custom error message which makes troubleshooting a lot easier. Different pages will come up for different errors so the user can immediately relay the problem they are having. This FAQ will help.
http://www.squid-cache.org/Doc/FAQ/FAQ-10.html#ss10.24
See below for my ad blocking message. I was trying to replace ads with the minimum of information. Squid will add a footer at the bottom of the page (see the FAQ) but the %s displays just the squid version which reduces the info a fair bit.
Cache Manager
�������������
See below for the additional lines in httpd.conf which hosts cachemgr.cgi. This was a very quick install but I managed to limit the number of httpd servers and add a password. squid.conf holds the password under 'cachemgr_passwd password all' and you can edit MinSpareServers and StartServers within httpd.conf. I have these both set at 1 because I can't foresee a tremendous amount of traffic heading that way.
smb.conf
��������
[global]
security = ads
password server = DC_hostname.example.domain.com
realm = EXAMPLE.DOMAIN.COM #must be in CAPS
workgroup = DOMAIN_NETBIOS_NAME
encrypt passwords = yes
idmap uid = 10000 - 20000
idmap gid = 10000 - 20000
winbind enum users = yes
winbind enum groups = yes
log file = /var/log/log.%m
winbind separator = \\
squid.conf
����������
http_port 3128
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_dir ufs /disk1/squid/var/cache 20000 16 256
debug_options ALL,1 33,2
auth_param ntlm program /usr/local/samba/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
auth_param ntlm children 3
auth_param ntlm max_challenge_reuses 0
auth_param ntlm max_challenge_lifetime 2 minutes
auth_param ntlm use_ntlm_negotiate on
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern . 0 20% 4320
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl subnet src "/usr/local/squid/etc/subnet.txt"
deny_info ERR_SUBNET subnet
acl ads url_regex "/usr/local/squid/etc/adurls.txt"
deny_info ERR_ADBLOCK ads
acl ads2 url_regex "/usr/local/squid/etc/adurls2.txt"
deny_info ERR_ADBLOCK ads2
acl badwords url_regex "/usr/local/squid/etc/badwords.txt"
acl company_site_dom dstdomain "/usr/local/squid/etc/companydomains.txt"
acl company_site_url url_regex "/usr/local/squid/etc/companyurls.txt"
external_acl_type ldap_group ttl=0 children=3 %LOGIN ../squid-2.5.STABLE12/helpers/external_acl/ldap_group/squid_ldap_group -b "ou=example_OU,dc=example,dc=domain,dc=com" -f "(&(cn=%a)(member=%v)(objectClass=group))" -F "(|(samAccountName=%s)(cn=%s))" -h DC_hostname.example.domain.com -D username -w password -v3 -S
acl full external ldap_group full_internet_access
acl restricted external ldap_group restricted_internet_access
acl company external ldap_group company_approved_internet_access
acl auth_users proxy_auth REQUIRED
http_access deny ads
http_access deny ads2
http_access deny !subnet
http_access allow company company_site_url
http_access allow company company_site_dom
http_access deny company !company_site_url
http_access deny company !company_site_dom
http_access allow restricted !badwords
http_access deny restricted badwords
http_access allow full
http_access deny !auth_users
http_access deny all
http_reply_access allow all
icp_access allow all
cache_mgr helpdesk@company.com
cache_effective_user proc_squid
cache_effective_group grp_squid
visible_hostname Squid
cachemgr_passwd password all
coredump_dir /disk1/squid/var/cache
httpd.conf
����������
ScriptAlias /squid/cgi-bin/ /usr/local/squid/libexec/
<Location /squid/cgi-bin/cachemgr.cgi>
order allow,deny
allow from workstation squid_IP
</Location>
Custom error message
��������������������
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>ERROR: The requested URL could not be retrieved</TITLE>
<STYLE type="text/css"><!--BODY{background-color:#ffffff;font-family:verdana,sans-serif}PRE{font-family:sans-serif}--></STYLE>
</HEAD><BODY>
Ad blocked by %s
I am very impressed with Squid, it's a worthy rival to it's competitors. Hopefully this guide is of some help to you and I welcome any comments and suggestions. As I said before, this is no guaranteed guide, it's just what worked in my environment.
Paul
Received on Mon Feb 27 2006 - 05:00:05 MST
This archive was generated by hypermail pre-2.1.9 : Wed Mar 01 2006 - 12:00:04 MST