RE: [squid-users] Re: Help, Help, help Squid2.5-Stables13 + WCCP

Dan,

When you say wccp router info, you mean a "show ip wccp webcache" on
your cisco router?
If that's what you mean the router ip doesn't mean anything, it can
actually change and it won't affect wccp operation. Not sure about the
unsupported method...

Thanks,
 Bryan
 

-----Original Message-----
From: Daniel EPEE LEA [mailto:epeelea@gmail.com]
Sent: March 20, 2006 3:58 AM
To: squid-users@squid-cache.org
Subject: [squid-users] Re: Help, Help, help Squid2.5-Stables13 + WCCP

Hello,

I have configured squid-2.5-Statble13 + WCCP + iptables DNAT
But I have to many invalid request.

I have noticed that the WCCP Router info shows the Router loopback
interface intead of the wccp router IP address. Can that be a problem
?

How do I get read of the unsupported methods issues that I have ?

This is my Cache.log info

2006/03/18 22:19:54| clientReadRequest: FD 3476 Invalid Request
2006/03/18 22:19:57| parseHttpRequest: Unsupported method
'recipientid=105&sessionid=2197

'
2006/03/18 22:19:57| clientReadRequest: FD 148 Invalid Request
2006/03/18 22:20:17| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:20:17| clientReadRequest: FD 3382 Invalid Request
2006/03/18 22:20:30| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:20:30| clientReadRequest: FD 2515 Invalid Request
2006/03/18 22:20:38| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:20:38| clientReadRequest: FD 1091 Invalid Request
2006/03/18 22:20:45| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:20:45| clientReadRequest: FD 382 Invalid Request
2006/03/18 22:20:52| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:20:52| clientReadRequest: FD 2548 Invalid Request
2006/03/18 22:21:12| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:21:12| clientReadRequest: FD 3150 Invalid Request
2006/03/18 22:21:36| parseHttpRequest: Unsupported method
'recipientid=155&sessionid=2873

'
2006/03/18 22:21:36| clientReadRequest: FD 376 Invalid Request
2006/03/18 22:21:36| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:21:36| clientReadRequest: FD 460 Invalid Request
2006/03/18 22:21:38| parseHttpRequest: Unsupported method
'recipientid=155&sessionid=2873

'
2006/03/18 22:21:38| clientReadRequest: FD 1655 Invalid Request
2006/03/18 22:21:39| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:21:39| clientReadRequest: FD 1655 Invalid Request
2006/03/18 22:22:10| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:22:10| clientReadRequest: FD 2515 Invalid Request
2006/03/18 22:22:27| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:22:27| clientReadRequest: FD 251 Invalid Request
2006/03/18 22:22:44| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:22:44| clientReadRequest: FD 776 Invalid Request
2006/03/18 22:22:51| parseHttpRequest: Unsupported method
'recipientid=114&sessionid=914
2006/03/18 22:22:51| clientReadRequest: FD 1490 Invalid Request
2006/03/18 22:22:55| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:22:55| clientReadRequest: FD 2858 Invalid Request
2006/03/18 22:23:02| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:23:02| clientReadRequest: FD 674 Invalid Request
2006/03/18 22:23:16| parseHttpRequest: Unsupported method 'REGISTER'
2006/03/18 22:23:16| clientReadRequest: FD 45 Invalid Request

Much Regards

Daniel

On 3/18/06, Daniel EPEE LEA <epeelea@gmail.com> wrote:
> Hi,
>
> Squid-2.5-STABLE13 + ip_gre WCCP + RHEL v4 U2 + 4Gigs RAM + Cache
> Dir to be 45 Gigs, but only 20Gigs now
>
> I have a high volume network ( /19)
> I had to increase the number of file descriptors and rebuild squid.
> Now it works Ok,
>
> But I notice a major slowness in browsing the internet. Plus site
> with streaming media take too much time to load. From some parts of my
> network, I get "Unable to reach Website answer"
>
> This is my config,
> ---------------------------
> iptables -nL -t nat
> Chain PREROUTING (policy ACCEPT)
> target prot opt source destination
> DNAT tcp -- [MyNet]/19 ![MyNet]/19 tcp dpt:80
to:[Cache IP]:3128
>
> -----------------------------------
> http_port [Cache IP]:3128
> icp_port 3130
> hierarchy_stoplist cgi-bin ?
> acl QUERY urlpath_regex cgi-bin \?
> no_cache deny QUERY
> cache_mem 256 MB
> cache_swap_low 90
> cache_swap_high 95
> maximum_object_size 4096 KB
> minimum_object_size 0 KB
> maximum_object_size_in_memory 8 KB
> cache_dir ufs /usr/local/squid/var/cache 20240 16 256
> cache_access_log /var/log/squid/access.log
> cache_log /var/log/squid/cache.log
> cache_store_log /var/log/squid/store.log
> mime_table /usr/local/squid/etc/mime.conf
> pid_filename /var/run/squid.pid
> auth_param basic children 5
> auth_param basic realm Squid proxy-caching web server
> auth_param basic credentialsttl 2 hours
> auth_param basic casesensitive off
> refresh_pattern ^ftp: 1440 20% 10080
> refresh_pattern ^gopher: 1440 0% 1440
> refresh_pattern . 0 20% 4320
> acl all src 0.0.0.0/0.0.0.0
> acl manager proto cache_object
> acl localhost src 127.0.0.1/255.255.255.255
> acl to_localhost dst 127.0.0.0/8
> acl SSL_ports port 443 563
> acl Safe_ports port 80 # http
> acl Safe_ports port 21 # ftp
> acl Safe_ports port 443 563 # https, snews
> acl Safe_ports port 70 # gopher
> acl Safe_ports port 210 # wais
> acl Safe_ports port 1025-65535 # unregistered ports
> acl Safe_ports port 280 # http-mgmt
> acl Safe_ports port 488 # gss-http
> acl Safe_ports port 591 # filemaker
> acl Safe_ports port 777 # multiling http
> acl CONNECT method CONNECT
> acl myacl src [MyNET]
> http_access allow myacl
> http_access allow manager localhost
> http_access deny manager
> http_access deny !Safe_ports
> http_access deny CONNECT !SSL_ports
> acl our_networks src [MyNET]
> http_access allow our_networks
> http_access deny all
> http_reply_access allow all
> icp_access allow all
> icp_access allow all
> tcp_outgoing_address [CacheIP]
> cache_mgr postmaster@domain.com
> cache_effective_user squid
> cache_effective_group squid
> visible_hostname cache.domain.com
> httpd_accel_host virtual
> httpd_accel_port 80
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
> logfile_rotate 10
> forwarded_for on
> cachemgr_passwd *****************
> snmp_port 3401
> snmp_access deny all
> wccp_router [Router IP]
> wccp_version 4
> wccp_outgoing_address [CacheIP]
> coredump_dir /usr/local/squid/var/cache
>
>
> How can i improve it ? so the all the serveices ate allowed without
> restriction ?
>
> Thanks for your answers
>
> Much regards,
>
> --------------------------
> Dan
>

--
--------------------------
Daniel Epee Lea