RE: [squid-users] Reloading squid makes squidGuard go nuts

This is squidguard.log below. Also I found an article on the web that
points to this problem. So now my question is, how can I tell Berkley
3.2.9 to be used instead of 2.7.7?
 

Squidguard reports "domainlist empty, removed from memory"

In spite of what the documentation says, Squidguard 1.20 requires
version 3.29 of the Berkely db. It won't work with version 2.27, nor
will it work with 4.0. The assertion that configure makes about
requiring 3.2.* or later is not really correct. SquidGuard needs 3.2.x
( not sure which version is too low) and we know specifically that it
works quite nicely with 3.2.9. With 3.3.x, it craps out every time.
Same with 2.7.7. (Thanks to Robert Nickel for these specifics).
(It has been reported that squidguard 1.20 will work with other versions
of the db if you are using plain text files for your blacklists; in
other words, if there are no *.db files in your blacklist directories.
This can really slow down the startup time of squid/squidguard, but
otherwise may not be harmful.)

Squidguard 1.14, on the other hand, requires Berkeley 2.27.
You can have version 2.27 and 3.2x installed at the same time.

My squidGuard version:
# /usr/local/bin/squidGuard -v
SquidGuard: 1.2.0 Sleepycat Software: Berkeley DB 2.7.7: (08/20/99)

My Squidguard.log

2006-03-27 09:05:21 [27825] loading dbfile
/usr/local/squidGuard/db/porn/domains.db
2006-03-27 09:05:21 [27825] domainlist empty, removed from memory
2006-03-27 09:05:21 [27825] init urllist
/usr/local/squidGuard/db/porn/urls
2006-03-27 09:05:21 [27825] loading dbfile
/usr/local/squidGuard/db/porn/urls.db
2006-03-27 09:05:21 [27825] urllist empty, removed from memory
2006-03-27 09:05:21 [27825] init domainlist
/usr/local/squidGuard/db/jaits/domains
2006-03-27 09:05:21 [27825] loading dbfile
/usr/local/squidGuard/db/jaits/domains.db
2006-03-27 09:05:21 [27825] domainlist empty, removed from memory
2006-03-27 09:05:21 [27825] init domainlist
/usr/local/squidGuard/db/whitelist/domains
2006-03-27 09:05:21 [27825] loading dbfile
/usr/local/squidGuard/db/whitelist/domains.db
2006-03-27 09:05:21 [27825] domainlist empty, removed from memory
2006-03-27 09:05:21 [27825] squidGuard 1.2.0 started (1143468321.803)
2006-03-27 09:05:21 [27825] squidGuard ready for requests
(1143468321.876)

-----Original Message-----
From: Mark Elsen [mailto:mark.elsen@gmail.com]
Sent: Monday, March 27, 2006 9:18 AM
To: Nick Duda
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] Reloading squid makes squidGuard go nuts

On 3/27/06, Nick Duda <nduda@vistaprint.com> wrote:
>
>
> Without doing the .db files it works. Using them now it doesn't. Here
is
> the conf file, very basic.
>

 - Check squidGuard.log; watchout for any errors.

 M.

---------------------
Confidentiality note
The information in this email and any attachment may contain confidential and proprietary information of
VistaPrint and/or its affiliates and may be privileged or otherwise protected from disclosure. If you are
not the intended recipient, you are hereby notified that any review, reliance or distribution by others
or forwarding without express permission is strictly prohibited and may cause liability. In case you have
received this message due to an error in transmission, please notify the sender immediately and to delete
this email and any attachment from your system.
---------------------
Received on Mon Mar 27 2006 - 07:29:04 MST