RE: [squid-users] squid performance epoll. 350req/sec 100% cpu from Sommariva Graziano on 2006-05-22 (squid-users)

From: Sommariva Graziano <[email protected]>
Date: Mon, 22 May 2006 16:43:14 +0200

This is the result odf bootstrap.sh:

WARNING: Cannot find autoconf version 2.13
Trying autoconf (GNU Autoconf) 2.59
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure.in:13: warning: do not use m4_patsubst: use patsubst or m4_bpatsubst
aclocal.m4:628: AM_CONFIG_HEADER is expanded from...
configure.in:13: the top level
configure.in:1555: warning: AC_CHECK_TYPE: assuming `u_short' is not a type
autoconf/types.m4:234: AC_CHECK_TYPE is expanded from...
configure.in:1555: the top level
configure.in:2552: warning: do not use m4_regexp: use regexp or m4_bregexp
aclocal.m4:641: _AM_DIRNAME is expanded from...
configure.in:2552: the top level
configure.in:13: warning: do not use m4_patsubst: use patsubst or m4_bpatsubst
aclocal.m4:628: AM_CONFIG_HEADER is expanded from...
configure.in:13: the top level
configure.in:1555: warning: AC_CHECK_TYPE: assuming `u_short' is not a type
autoconf/types.m4:234: AC_CHECK_TYPE is expanded from...
configure.in:1555: the top level
configure.in:2552: warning: do not use m4_regexp: use regexp or m4_bregexp
aclocal.m4:641: _AM_DIRNAME is expanded from...
configure.in:2552: the top level
configure.in:2365: error: do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoconf failed
Autotool bootstrapping failed. You will need to investigate and correct
before you can develop on this source tree

ELSAG

DOI - Divisione Outsourcing Informatico

Graziano Sommariva

ICT Network Manager

* +39-10-658.3921
* +39-348-8558742
* Graziano.Sommariva@elsag.it

NOTA : Questo messaggio e-mail e ogni documento ad esso eventualmente allegato pu� avere carattere riservato ed essere tutelato da segreto. Esso,comunque, � ad esclusivo utilizzo del destinatario in indirizzo. Qualora non foste il destinatario del messaggio vi preghiamo di volerci avvertire immediatamente per e-mail o telefono e di cancellare il presente messaggio e ogni eventuale allegato dal vostro sistema. E' vietata la duplicazione o l'utilizzo per qualunque fine del messaggio e di ogni allegato, nonch� la loro divulgazione, distribuzione o inoltro a terzi senza l'espressa autorizzazione del mittente. In ragione del mezzo di trasmissione utilizzato, il mittente non assume alcuna responsabilit� sulla segretezza/riservatezza delle informazioni contenute nel messaggio e nei relativi allegati.

NOTE : This e-mail and any file transmitted with it may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. If you are not the intended recipient of this e-mail, please do not read it, notify us immediately by e-mail or by telephone and then delete this message and any file attached from your system. You should not copy or use it for any purpose, disclose the contents of the same to any other person or forward it without express permission.Considering the means of transmission, we do not undertake any liability with respect to the secrecy and confidentiality of the information contained in this e-mail and its attachments.

-----Original Message-----
From: Sommariva Graziano [mailto:Graziano.Sommariva@elsag.it]
Sent: luned� 22 maggio 2006 12.54
To: Michal Mihalik; Chris Robertson
Cc: Squid Users
Subject: RE: [squid-users] squid performance epoll. 350req/sec 100% cpu

Hello,

I did the same, but CPU load did not decrease significantly, Why?

King Regards,

Graziano

ELSAG

DOI - Divisione Outsourcing Informatico

Graziano Sommariva

ICT Network Manager

* +39-10-658.3921
* +39-348-8558742
* Graziano.Sommariva@elsag.it

-----Original Message-----
From: Michal Mihalik [mailto:michal.mihalik@petitpress.sk]
Sent: mercoled� 29 marzo 2006 9.03
To: 'Chris Robertson'
Cc: Squid Users
Subject: RE: [squid-users] squid performance epoll. 350req/sec 100% cpu

Hi,
At the end I did get it running. The load dropped massively. To about 16%cpu at 400req/sec. (originaly 100%cpu).
If there are no other problems with it. I would realy suggest it to everyone who has CPU problem.

Thanks to people in this list.
Mike

> -----Original Message-----
> From: Chris Robertson [mailto:crobertson@gci.net]
> Sent: Tuesday, March 28, 2006 10:05 PM
> To: Michal Mihalik
> Subject: Re: [squid-users] squid performance epoll.
> 350req/sec 100% cpu
>
> Michal Mihalik wrote:
>
> >Hi
> > ok I learned the strace and it does call select (99% of time)
> >
> > looks like my epoll is not active :-(( and I did found that I didn't
> > compile it as I should.
> >
> >But now I am unable to compile because of this errors.
> > I don't have automake 1.5 (only 1.4 1.6 1.7 1.9) And autoconf too I
> >do have debian stable... And added to it apt sources ->
> testing (to get
> >latest squid)
> >
> >Can someone help tu run this?
> >I don't understand this whole think of automake autoconf
> >
> >
> >
> SNIP
>
> >Thanks
> > Mike
> >
> >
> >
> >
> Did you ever get epoll working? If not, read the messages at
> http://www.squid-cache.org/mail-archive/squid-users/200602/060
> 9.html and
> http://www.squid-cache.org/mail-archive/squid-users/200602/061
> 1.html.
> If so, how has it been working for you?
>
> Chris
>
Received on Mon May 22 2006 - 08:43:22 MDT

This archive was generated by hypermail pre-2.1.9 : Thu Jun 01 2006 - 12:00:02 MDT