RE: [squid-users] WCCPv2 current instructions?

From: Henrik Nordstrom <[email protected]>
Date: Sat, 16 Sep 2006 11:11:08 +0200

fre 2006-09-15 klockan 22:57 -0600 skrev Shaun Skillin (home):

> I'm afraid I must still be missing something... according to the FAQ you
> referenced (thank you by the way), the <Host-IP> should be used for the
> eth0 and the wccp0 interface, which of course it doesn't like to do.

Yes, and it works fine. There is no problem to have the same IP on many
interfaces.

> I used 1.2.3.4/32 for the wccp0 interface.

A few things works better if the wccp interface has the same IP.

> I see a redirected SYN packet arrive from the router to the Squid that
> is GRE encapsulated. Then I see the SYN packet (not in GRE tunnel) sent
> to its gateway, but it is using the IP address of the original sender,
> not the Squid (however it does use the MAC of the Squid).

Then your firewall iptables rules is not set proper.

Regards
Henrik

Received on Sat Sep 16 2006 - 03:11:20 MDT

This archive was generated by hypermail pre-2.1.9 : Sun Oct 01 2006 - 12:00:03 MDT