RE: [squid-users] WCCPv2 current instructions?

I see the logic here, but what values should be used - do you have
experience with this problem? I would think to use 1460 for each one.
Also, all my devices are on the same network, and it seemd to want an IP
address instead of "eth0" for a gateway. Any ideas? Thanks!!

-----Original Message-----
From: Henrik Nordstrom [mailto:henrik@henriknordstrom.net]
Sent: Thursday, September 21, 2006 1:17 PM
To: Shaun Skillin (home)
Cc: Squid Users
Subject: RE: [squid-users] WCCPv2 current instructions?

tor 2006-09-21 klockan 11:10 -0600 skrev Shaun Skillin (home):
> Thanks Henrik, it's coming into focus more now... I wonder f you have
a
> suggestion on how to tune the MSS on my Linux box?

ip route add clientnetwork/masksize via ip.of.gateway advmss NNNN mtu
XXXX

gives you full flexibility to control the MTU in both directions. the
MSS is the MTU for packets client->proxy, and the MTU is the MTU for
packets proxy->client.

Regards
Henrik
Received on Thu Sep 21 2006 - 17:07:43 MDT