Re: [squid-users] Re: cache_peer problenms in accelerator mode

oops typo.
The configuration is:

http_port 80 vhost
cache_peer 127.0.0.1 parent 82 0 no-query originserver
cache_peer squid2 sibling 80 3130
cache_peer squid3 sibling 80 3130

On 9/29/06, Edward Rosinzonsky <erosin@gmail.com> wrote:
> Hi,
>
> Thanks for your reply.
> I uppgraded to 2.6,
>
> The cache.log file now seems to acknowledge that there are siblings
> with the following lines:
> 2006/09/29 21:34:52| Configuring Parent 127.0.0.1/82/0
> 2006/09/29 21:34:52| Configuring Sibling squid2/80/3130
> 2006/09/29 21:34:52| Configuring Sibling squid3/80/3130
>
> but I still see misses where I would expect to see sibling hits.
>
> I also see this in the cache.log file. Don't know what to make of it:
>
> 2006/09/29 21:35:25| temporary disabling (Not Found) digest from 127.0.0.1
> 2006/09/29 21:36:32| temporary disabling (Service Unavailable) digest
> from rele105
> 2006/09/29 21:37:32| temporary disabling (Service Unavailable) digest
> from rele107
> 2006/09/29 21:40:25| temporary disabling (Not Found) digest from 127.0.0.1
> 2006/09/29 21:41:32| temporary disabling (Forbidden) digest from squid2
> 2006/09/29 21:42:32| temporary disabling (Forbidden) digest from squid3
> 2006/09/29 21:47:27| Detected DEAD Sibling: squid2
> 2006/09/29 21:47:27| Detected REVIVED Sibling: squid2
> 2006/09/29 21:50:25| temporary disabling (Not Found) digest from 127.0.0.1
> 2006/09/29 21:51:32| temporary disabling (Forbidden) digest from squid2
> 2006/09/29 21:52:32| temporary disabling (Forbidden) digest from squid3
>
> The configuration is largely the same, exept for the following instead
> of http_accel:
> http_port 80 vhost
> cache_peer 127.0.0.1 parent 82 0 no-query originserver
> cache_peer squid2 sibling 80 3130
> cache_peer squid2 sibling 80 3130
>
> port 3130 is open on all 3 machines.
>
> Thanks.
>
> On 9/29/06, Henrik Nordstrom <henrik@henriknordstrom.net> wrote:
> > fre 2006-09-29 klockan 13:36 -0700 skrev Edward Rosinzonsky:
> > > "bump"
> > >
> > > On 9/26/06, Edward Rosinzonsky <erosin@gmail.com> wrote:
> > > > Hi,
> > > >
> > > > I'm running squid in accelerator mode, and can't get a sibling cache
> > > > working. The cache.log file doesn't say anything about siblings or
> >
> > > >
> > > > http_port 80
> > > > httpd_accel_host 127.0.0.1
> > > > acl acceleratedHost dst 127.0.0.1/255.255.255.255
> >
> > Don't remember much of the "accelerator" mode in 2.5, but I can't
> > remember any reasons why siblings in accelerator mode would not work..
> >
> > Please try with 2.6. Memory much clearer there, and no interest to dive
> > back into the 2.5 swamp.
> >
> > Regards
> > Henrik
> >
> >
> >
>
Received on Fri Sep 29 2006 - 23:21:02 MDT