[squid-users] Squid + WCCPv2 + Tproxy

Hello all,

 We have Installed squid-2.6STABLE9 and configured the WCCPv2. The
configuration works with just WCCPv2, but when TPROXY is configured it
doesn't work.

 The squid configuration details and router details are given below.

    http_port 3128 transparent tproxy
    tcp_outgoing_address SQUID-IP
    wccp2_router ROUTER-IP
    wccp_version 4
    wccp2_forwarding_method 1
    wccp2_return_method 1
    wccp2_assignment_method 1
    wccp2_service dynamic 80
    wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
ports=80
    wccp2_service dynamic 90
    wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80

  sysctl.conf:
     echo 0 >/proc/sys/net/ipv4/conf/wccp/rp_filter
    echo 1 >/proc/sys/net/ipv4/ip_forward

  Iptables:
    iptables -t tproxy -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j
TPROXY --on-port 3128

 Cisco 7200 series
  IOS version 12.3(16a)
        Route will be configured the squid FAQ document instrasions
http://wiki.squid-cache.org/SquidFaq/InterceptionProxy#head-5887c3744368f290e63fda47fd1e4715c9bdbc9b

I have checked the router access list the packets will be loopback the
interface.At a time I get a message saying "request sent" in Browsers but
doesn't seem to get the page

What is the problem?. Please help me to solve this problem.

Thanks in advance,
-Jag
Received on Sun Feb 11 2007 - 20:58:39 MST