Re: [squid-users] Service Lost issues using WCCP v2

From: Arnaud Loonstra <[email protected]>
Date: Thu, 19 Jul 2007 15:33:36 +0200

On Thu, 2007-07-19 at 09:01 -0400, Juan C. Crespo R. wrote:
> Did you try to make the Tunnel setting the loopback ip of the
> router instead of 192.168.0.6 ?
>
Do you mean like this?

ip tunnel add wccp0 mode gre remote 172.31.255.6 local 10.1.250.10 dev
eth0
up ip addr add 10.1.250.10/32 dev wccp0
up ip link set wccp0 up

It still gives me the service lost problems and it's still trying to
sent to 192.168.0.1

Jul 19 15:19:47.765: WCCP-PKT:S00: Received valid Here_I_Am packet from
10.1.250.10 w/rcv_id 00034092
Jul 19 15:19:47.765: WCCP-PKT:S00: Sending I_See_You packet to
10.1.250.10 w/ rcv_id 00034093
Jul 19 15:19:57.765: WCCP-PKT:S00: Received valid Here_I_Am packet from
192.168.0.1 w/rcv_id 00034093
Jul 19 15:19:57.765: WCCP-PKT:S00: Sending I_See_You packet to
192.168.0.1 w/ rcv_id 00034094
Jul 19 15:20:07.765: WCCP-PKT:S00: Sending I_See_You packet to
192.168.0.1 w/ rcv_id 00034095
Jul 19 15:20:17.769: WCCP-PKT:S00: Sending I_See_You packet to
192.168.0.1 w/ rcv_id 00034096
Jul 19 15:20:22.765: WCCP-PKT:S00: Sending Removal_Query packet to
192.168.0.1w/ rcv_id 00034097
Jul 19 15:20:27.766: %WCCP-1-SERVICELOST: Service web-cache lost on WCCP
client 10.1.250.10
Jul 19 15:20:27.774: WCCP-PKT:S00: Sending I_See_You packet to
10.1.250.10 w/ rcv_id 00034098
Jul 19 15:20:37.774: %WCCP-5-SERVICEFOUND: Service web-cache acquired on
WCCP client 10.1.250.10
Jul 19 15:20:37.774: WCCP-PKT:S00: Received valid Here_I_Am packet from
10.1.250.10 w/rcv_id 00034098

Though I was watching the logs while doing nothing but as soon as I
started requesting webpages it started sending I see you packets to
192.168.0.1. Does this feel like a Cisco bug???

Arnaud.

Amarantis Onderwijsgroep is de concernorganisatie van ISA-scholen en ROC ASA
Received on Thu Jul 19 2007 - 07:33:55 MDT

This archive was generated by hypermail pre-2.1.9 : Wed Aug 01 2007 - 12:00:03 MDT