Re: [squid-users] TRANSEPARENT PROXY WITH SQUID 2.6

http_port 3128 transparent

That should do it.

Adrian

On Fri, Aug 10, 2007, Indunil Jayasooriya wrote:
> Hi,
>
> I am running squid as a TRANSEPARENT PROXY WITH SQUID 2.5 on CENTOS 4.5.
>
> Pls see below for squid.con file.
>
>
> http_port 3128
> cache_mem 64 MB
> cache_dir ufs /var/spool/squid 100 16 256
> cache_access_log /var/log/squid/access.log
> cache_log /var/log/squid/cache.log
> cache_store_log /var/log/squid/store.log
>
> # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
>
> # Example rule allowing access from your local networks. Adapt
> # to list your (internal) IP networks from where browsing should
> # be allowed
>
> acl mynet src 192.168.101.0/24
> http_access allow mynet
>
> httpd_accel_host virtual
> httpd_accel_port 80
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
>
>
> I am ruunnig itables on the SAME BOX. I have added below rules for squid.
>
> #Redirecting traffic destined to port 80 to port 3128
> iptables -t nat -A PREROUTING -p tcp -i eth2 --dport 80 -j REDIRECT
> --to-port 3128
>
> #For squid traffic to Accept
> iptables -A INPUT -i eth2 -d 192.168.101.254 -p tcp -s
> 192.168.101.0/24 --dport 3128 -j ACCEPT
>
> Evrything works fine.
>
> Now, I am ging to upgrade CENTOS 4.5 to CENTOS 5. It comes with SQUID 2.6.
>
> But, squid.conf file in SQUID 2.6 has no below lines.
>
> httpd_accel_host virtual
> httpd_accel_port 80
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
>
> So, I want to know how to setup squid as a TRANSEPARENT PROXY, when it
> comes to SQUID 2.6.
>
> any idea?
> --
> Thank you
> Indunil Jayasooriya

-- 
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
- $25/pm entry-level bandwidth-capped VPSes available in WA -