Re: [squid-users] Squid and WCCP

Hi,

Yes, the GRE is working. My unit is 10.10.11.1 and the cisco is 10.10.250.1:

gre0: flags=b051<UP,POINTOPOINT,RUNNING,LINK0,LINK1,MULTICAST> mtu 1476
        tunnel inet 10.10.11.1 --> 10.10.250.1
        inet 10.10.11.1 --> 10.20.30.40 netmask 0xffffffff

and this from the router:
        WCCP Client ID: 10.10.11.1
        Protocol Version: 2.0
        State: Usable
        Initial Hash Info: 00000000000000000000000000000000
                                 00000000000000000000000000000000
        Assigned Hash Info: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
                                 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
        Hash Allotment: 128 (50.00%)
        Packets s/w Redirected: 0
        Connect Time: 00:04:20
        Bypassed Packets
          Process: 0
          Fast: 0
          CEF: 0

Thanks again,
Ian

On 8/29/07, Henrik Nordstrom <henrik@henriknordstrom.net> wrote:
> On tis, 2007-08-28 at 21:12 +0200, Ian wrote:
> > Hi,
> >
> > I am trying to get squid working with my cisco router.How it works is
> > network flows through my unit and enters the cisco on FE0. Below are
> > copies of both configurations which seem correct, yet the whole setup
> > doesnt work correctly, which is my question as why not? Is everything
> > correct and just the physical layout, or is my configuration wrong?
>
> Have you set up the required GRE endpoint on the cache server and added
> the needed firewall rules to have the redirected traffic sent to the
> proxy?
>
> Regards
> Henrik
>
>
Received on Wed Aug 29 2007 - 00:45:50 MDT