I am stuck on confuse...
I have no idea with this...
I trying to configure the iptables only with this following command
(with default policy set to ACCEPT)
iptables -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp --dport 80 -j DNAT --to squid-box:3128iptables -t nat -A POSTROUTING -o eth0 -s local-network -d squid-box -j SNAT --to iptables-boxiptables -A FORWARD -s local-network -d squid-box -i eth0 -o eth0 -p tcp --dport 3128 -j ACCEPTnote:
- eth0 -> internal device
My proxy box was ignored...
I have configured squid with some access control, to block some words, domains, an IPs.
I tested to access the web box outside the network, here's the result:
- the sites was opened successfully
- when i try to adding a "blocked word" (such as "porn")..
the sites also successfully open the page...
Squid was ignored...
What should I do...
Help me guys...
Thanks
Rachmat Hidayat Al Anshar
----- Original Message ----
> From: Rachmat Hidayat Al Anshar <rachmat_hidayat_03@yahoo.com>
> To: squid cache <squid-users@squid-cache.org>
> Cc: Chris Zhang <abnamro.chris@gmail.com>
> Sent: Thursday, January 10, 2008 3:50:24 PM
> Subject: [squid-users] Re: [help] setting up firewall policy for transparent (single-homed host) proxy
>
> ----- Original Message ----
> > From: Chris Zhang
> > To: Rachmat Hidayat Al Anshar
> > Sent: Thursday, January 10, 2008 2:12:48 PM
> > Subject: Re: [help] setting up firewall policy for
> transparent
>
(single-homed host) proxy
> >
> > Hi Rachmat,
> >
> >
> > Did you take that line out and then tried it again and it still
> > didn't work?
>
> Yes I do, I have done with it, and the proxy box still ignored
>
> > I don't think you need to recompile Squid, you need to change
> > /etc/squid.conf file as suggested by the link I pointed to you. More
> > specifically, make sure you have these lines,
> >
> > * httpd_accel_host virtual
> > * httpd_accel_port 80
> > * httpd_accel_with_proxy on
> > * httpd_accel_uses_host_header on
> >
> I also finish with it...
>
> > Also I am a bit confused with the setup you had there. Does
> your
>
squid
> > machine have a public IP? My understanding is that all your
> computers
>
> > that are behind the firewall are NATed, this also includes
> your
>
Squid.
>
> All of this deployed at vmware, the virtual environment.
> There is only an example of public environment. And you're
> correct, my squid box located behind firewall (also act as nat device).
>
> > The idea with a transparent proxy is that you configure all client
> > computers to use the gateway, on the gateway you have rules which
> > say
> >
> if
> > the outgoing port is port 80, and the traffic is coming from
> > your
> >
> client
> > machines, redirect those traffic to your Squid machine on port 3128.
> >
> > 'iptables -t nat -A PREROUTING -i eth0 -d iptables-box -p tcp
> > --dport
> >
> 80 -j ACCEPT' is saying if the traffic is going INTO the gateway
> > (in
> >
> your case these traffic originate from the clients), and if
> > the
> >
> destination port is port 80, protocol is tcp, accept it.
>
> Yep, its correct.
> ### Squid Transparent Proxy
> iptables -t nat -A PREROUTING -i eth0 -d iptables-box -p tcp --dport 80
> -j ACCEPT
> iptables -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp --dport 80
> -j DNAT --to squid-box:3128
>
> iptables -t nat -A POSTROUTING -o eth0 -s local-network -d squid-box -j
> SNAT --to iptables-box
> iptables -A FORWARD -s local-network -d squid-box -i eth0 -o eth0 -p
> tcp --dport 3128 -j ACCEPT
>
> > But you really want this line '
> > iptables -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp --dport
> > 80
> >
> -j DNAT --to squid-box:3128' which is the line after the first line.
> >
> >
> > The result of having this first line before the second line (
> > iptables
> >
> -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp --dport 80 -j
> > DNAT
> >
> --to squid-box:3128 ) is that the second line will never catch
> > any
> >
> traffic.
> >
> >
> > Please
> > see
> >
> http://www.faqs.org/docs/Linux-mini/TransparentProxy.html#ss2.3 . It
> > is
> >
> exactly what you need.
> >
> >
> > Chris
> >
> >
> I have done following steps on
> this
>
http://www.faqs.org/docs/Linux-mini/TransparentProxy.html#s6
> But my proxy still ignored. How is it?
> I'll try it once more...anyway...
>
> Thanks
> Rachmat Hidayat Al Anshar
>
>
> >
> >
> >
> >
> >
> >
> >
> > Rachmat Hidayat Al Anshar wrote:
> > > Hay ho Chris,
> > > Thanks for replying.
> > >
> > > First of all, I have reference to that link, but in other
> > disscussion
> >
> forum
> > > I found someone out there says that...
> > > " The traffic is being caught by the first rule, since
> the
>
connection
> > > probably isn't coming from the squid box. Before that rule,
> you
>
need
> > > to put in an ACCEPT for http packets aimed at the firewall box:
> > > iptables -t nat -A PREROUTING -i eth0 -d iptables-box -p tcp \
> > > --dport 80 -j ACCEPT"..something like that...
> > > I have been trying for many times, and I still can't solve
> > this
> >
> problem.
> > >
> > > Is it about compiling options,
> > > What command that I have to issue to get informed, what configure
> > > option that squid used to compile at compiling process for a
> > first
> >
> time???
> > >
> > > Can we re-compile squid? If so, what should I do?
> > >
> > > Thanks in advance
> > > Rachmat Hidayat Al Anshar
> > >
> > >
> > >
> > > ----- Original Message ----
> > >
> > >> From: Chris Zhang
> > >> To: Rachmat Hidayat Al Anshar
> > >> Cc: linux@lists.samba.org
> > >> Sent: Wednesday, January 9, 2008 7:11:46 PM
> > >> Subject: Re: [clug] [help] setting up firewall policy
> > for
> >
> transparent (single-homed host) proxy
> > >>
> > >> Hi Rachmat,
> > >>
> > >>
> > >> Maybe you want to try it again without this line
> > >>
> > >>
> > >> 'iptables -t nat -A PREROUTING -i eth0 -d iptables-box -p tcp
> > >> --dport
> > >>
> > >>
> > > 80
> > >
> > >> -j ACCEPT'
> > >>
> > >>
> > >> Also I think you will have to change squid.conf file (see
> > >> http://www.faqs.org/docs/Linux-mini/TransparentProxy.html#ss2.3 )
> > >>
> > >>
> > >> Chris
> > >>
> > >>
> > >> Rachmat Hidayat Al Anshar wrote:
> > >>
> > >>> var YAHOO = {'Shortcuts' : {}};
> > >>> YAHOO.Shortcuts.hasSensitiveText = false;
> > >>> YAHOO.Shortcuts.sensitivityType = [];
> > >>> YAHOO.Shortcuts.doUlt = false;
> > >>> YAHOO.Shortcuts.location = "us";
> > >>> YAHOO.Shortcuts.document_id = 0;
> > >>> YAHOO.Shortcuts.document_type = "";
> > >>> YAHOO.Shortcuts.document_title = "[help] setting up firewall
> > >>>
> > >> policy
> > >>
> > >>
> > > for transparent (single-homed host) proxy";
> > >
> > >>> YAHOO.Shortcuts.document_publish_date = "";
> > >>> YAHOO.Shortcuts.document_author = "rachmat_hidayat_03@yahoo.com";
> > >>> YAHOO.Shortcuts.document_url = "";
> > >>> YAHOO.Shortcuts.document_tags = "";
> > >>> YAHOO.Shortcuts.annotationSet = {
> > >>> "lw_1199853885_0": {
> > >>> "text": "Yahoo! Mobile",
> > >>> "extended": 0,
> > >>> "startchar": 1530,
> > >>> "endchar": 1542,
> > >>> "start": 1530,
> > >>> "end": 1542,
> > >>> "extendedFrom": "",
> > >>> "predictedCategory": "ORGANIZATION",
> > >>> "predictionProbability": "0.679211",
> > >>> "weight": 0.661212,
> > >>>
> > >>>
> > >> "type":
> > >>
> > >>
> > > ["shortcuts:/us/instance/organization/company/yahoo_property"],
> > >
> > >>> "category": ["ORGANIZATION"],
> > >>> "context": "friend newshound and know-it-all with Yahoo
> Mobile
>
Try
> > >>>
> > >> it
> > >>
> > >>
> > > now",
> > >
> > >>> "metaData": {
> > >>> "yprop_name": "Yahoo! Mobile",
> > >>> "yprop_url": "http://mobile.yahoo.com/"
> > >>> }
> > >>> }
> > >>> };
> > >>>
> > >>> Hi all...
> > >>>
> > >>> I am on my research deploying a transparent single-homed
> host
>
proxy
> > >>> server on my virtual network. My squid box is not on the same
> > >>>
> > >> box
> > >>
> > >>
> > > where the
> > >
> > >>> firewall applied. I didn't have any idea how to set up the
> > >>>
> > >> iptables
> > >>
> > >>
> > > running on
> > >
> > >>> the firewall, so I can redirect all client's web request to my
> > >>>
> > >> proxy
> > >>
> > >>
> > > box,
> > >
> > >>> and make it as the only host on the network may request web
> > >>>
> > >> services
> > >>
> > >>
> > > through
> > >
> > >>> firewall to the Internet...???
> > >>>
> > >>>
> > >>> INTERNET <---> FIREWALL <---> switch <---> NAT DEV<---> INTRANET
> > >>> ^
> > >>> |
> > >>> v
> > >>>
> > >>> squid web
> > >>> proxies
> > >>>
> > >>> I try to use this following firewall script...
> > >>>
> > >>> #!/bin/sh
> > >>> # Firewall Script
> > >>> ###############################################################
> > >>> ### interfaces
> > >>> EXT_DEV=eth0
> > >>> INT_DEV=eth1
> > >>> INT_NET=10.1.1.0/24
> > >>>
> > >>> ### Loading firewall modules
> > >>> modprobe ip_conntrack
> > >>> modprobe ip_conntrack_ftp
> > >>>
> > >>> ###############################################################
> > >>> ### Enable Packet Forwarding
> > >>> echo 1 > /proc/sys/net/ipv4/ip_forward
> > >>>
> > >>> ### Remove all previous rules, and delete any user defined chains
> > >>> iptables -F
> > >>> iptables -X
> > >>> iptables -t nat -F
> > >>> iptables -t nat -X
> > >>>
> > >>> ### Set the default policies to drop
> > >>> iptables -P INPUT DROP
> > >>> iptables -P OUTPUT DROP
> > >>> iptables -P FORWARD DROP
> > >>>
> > >>> ### Loopback device OK
> > >>> iptables -A INPUT -i lo -s 127.0.0.0/8 -d 127.0.0.0/8 -j ACCEPT
> > >>> iptables -A OUTPUT -o lo -s 127.0.0.0/8 -d 127.0.0.0/8 -j ACCEPT
> > >>>
> > >>> ### Allow all ICMP Traffic (optional) - IN, OUT and THROUGH.
> > >>> iptables -A INPUT -p icmp --icmp-type any -j ACCEPT
> > >>> iptables -A OUTPUT -p icmp --icmp-type any -j ACCEPT
> > >>> iptables -A FORWARD -p icmp --icmp-type any -j ACCEPT
> > >>>
> > >>> ### Allow all Internal traffic to Server
> > >>> iptables -A INPUT -i $INT_DEV -s $INT_NET -d $INT_NET -j ACCEPT
> > >>> iptables -A OUTPUT -o $INT_DEV -s $INT_NET -d $INT_NET -j ACCEPT
> > >>>
> > >>> ### OUTBOUND Rule: Allow ALL packets out the external device
> > >>> iptables -A OUTPUT -o $EXT_DEV -j ACCEPT
> > >>> iptables -A FORWARD -i $INT_DEV -o $EXT_DEV -j ACCEPT
> > >>>
> > >>> ### INBOUND Rule: Allow ALL EXT packets if a connection
> > >>>
> > >> already
> > >>
> > >>
> > > exists (See "NEW" Inbound Rules)
> > >
> > >>> iptables -A INPUT -i $EXT_DEV -m state --state
> > >>>
> > >> RELATED,ESTABLISHED
> > >>
> > >>
> > > -j ACCEPT
> > >
> > >>> iptables -A FORWARD -i $EXT_DEV -m state --state
> > >>>
> > >> RELATED,ESTABLISHED
> > >>
> > >>
> > > -j ACCEPT
> > >
> > >>> ### Squid Transparent Proxy
> > >>> iptables -t nat -A PREROUTING -i eth0 -d iptables-box -p tcp
> > >>>
> > >> --dport
> > >>
> > >>
> > > 80 -j ACCEPT
> > >
> > >>> iptables -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp
> > >>>
> > >> --dport
> > >>
> > >>
> > > 80 -j DNAT --to squid-box:3128
> > >
> > >>> iptables -t nat -A POSTROUTING -o eth0 -s local-network -d
> > >>>
> > >> squid-box
> > >>
> > >>
> > > -j SNAT --to iptables-box
> > >
> > >>> iptables -A FORWARD -s local-network -d squid-box -i eth0 -o eth0
> > >>>
> > >> -p
> > >>
> > >>
> > > tcp --dport 3128 -j ACCEPT
> > >
> > >>> and the result is:
> > >>> - client's web browser ignore the squid proxy
> > >>> the http service is directly passing through the firewall
> > >>>
> > >>> All response will greatly appreciated.
> > >>>
> > >>>
> > >>> Thanks in advance (^^,)
> > >>> Rachmat Hidayat Al Anshar
> > >>>
> > >>> Be a better friend, newshound, and
> > >>> know-it-all with Yahoo! Mobile. Try it now.
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >
> >
>
> >
>
_______________________________________________________________________________
> > >
> > >> _____
> > >>
> > >>> Never miss a thing. Make Yahoo your home page.
> > >>> http://www.yahoo.com/r/hs
> > >>>
> > >>>
> > >>>
> > >>
> > >
> > >
> > >
> > >
> > >
> >
>
_______________________________________________________________________________
> > _____
> > > Be a better friend, newshound, and
> > > know-it-all with Yahoo! Mobile. Try it
> > now.
> >
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > >
> > >
> > >
> >
> >
>
>
>
>
>
>
> ________________________________________________________________________________
> ____
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
Received on Thu Jan 10 2008 - 03:38:56 MST
This archive was generated by hypermail pre-2.1.9 : Fri Feb 01 2008 - 12:00:04 MST