Re: [squid-users] Web service failing through squid

From: Adrian Chadd <[email protected]>
Date: Wed, 30 Jan 2008 12:21:09 +0900

2.5 isn't really supported by anyone anymore; I'd suggest upgrading to
the latest 2.X (which is 2.6.STABLE18 atm) or 3.X (3.0.STABLE1) releases
and see if it works.

Adrian

On Tue, Jan 29, 2008, Gavin Hamill wrote:
> Hi,
>
> We have a 2.5.12 installation on Ubuntu dapper which we're having
> problems using with a remote SOAP web service. Squid has been happily
> chugging away for over a year for our busy LAN, and this is the first
> issue we've had with it.
>
> In short, squid passes the SOAP request from the LAN client to the
> service, and squid receives a reply from said service, but squid then
> passes an empty document back to the client on the LAN.
>
> I've made a tcpdump capture available at http://bum.net/squid.cap
>
> LAN client = 10... , Squid IP = 194..., Remote Service = 212...
>
> There are two packets with invalid checksums - I used a hex editor to
> remove our user/password from the data stream.
>
> I notice that HTTP/1.0 has been requested by the client, yet it
> specifies a Host: header - but I can't imagine this is the cause of the
> issue. Any advice would be warmly welcomed!
>
> Cheers,
> Gavin.
>

-- 
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
- $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
Received on Tue Jan 29 2008 - 20:10:10 MST

This archive was generated by hypermail pre-2.1.9 : Fri Feb 01 2008 - 12:00:05 MST