Re: [squid-users] Change squid binary in flight

Lluis Ribes wrote:
> Hi,
>
> I've finally resolve my problem. I compiled the version 3 STABLE10 with
> --with-filedescriptors=8192 and --prefix=/opt/squid. After this, I shutdown
> down Squid, I ran "make install" and squid was installed in the same Debian
> default location (/opt/squid/), but only the binary: my config file doesn't
> change it :)
>
> The last step wasn't configure max_filedescriptors parameter in squid.conf,
> because this parameter doesn't work, I don't know why... the last step was
> to write the line "ulimit -n 8192" in the startup script
> (/etc/init.d/squid), at the beginning.

For the record: max_filedescriptors options is not ported to Squid-3 yet.

Amos

>
> I started squid (/etc/init.d/squid) and now I'm running with 8192 file
> descriptors!
>
> Thanks all for your help!
>
> Llu�s Ribes
>
> -----Mensaje original-----
> De: Amos Jeffries [mailto:squid3_at_treenet.co.nz]
> Enviado el: viernes, 21 de noviembre de 2008 4:19
> Para: Kinkie
> CC: Lluis Ribes; squid-users_at_squid-cache.org
> Asunto: Re: [squid-users] Change squid binary in flight
>
>> On Thu, Nov 20, 2008 at 7:10 PM, Lluis Ribes <lribes_at_lavinia.tc> wrote:
>>> Dear Squid Folks,
>>>
>>> I have a Squid 3.0Stable1 running in a server. This version was
>>> installed
>>> with apt-get Debian package utility. So, it has worked fine until now,
>>> where
>>> I have file descriptor problems.
>>>
>>> I saw that my installation has 1024 files as max_filedescriptor, I think
>>> not
>>> much. I want to change it, but the parameter max_filedescriptor in
>>> squid.conf doesn't work (I receive an error message about unknown
>>> parameter).
>> Are you sure? It may be a runtime limitation; please check that
>> there's a 'ulimit -n 8192' line in the squid startup script (replace
>> 8192 with your desired limit).
>>
>>> So, I think thah the only way is recompile with file_descriptor flag:
>>>
>>> ./configure --with-filedescriptors=8192 --prefix=/opt/squid
>>> --with-openssl
>>> --enable-ssl --disable-internal-dns --enable-async-io
>>> --enable-storeio=ufs,diskd
>>>
>>> Ok, I compiled Squid 3.0Stable10. So my question is:
>>>
>>> Could I replace directly the binary that it was generated by my
>>> compilation
>>> process and located in $SQUID_SOURCE/src/squid with my debian binary
>>> version
>>> that it's running nowadays? I have to avoid lost of service of my web.
>> the debian package may have different configure options; if you miss
>> some configuration option your configuration file may be incompatible
>> with your new binary.
>> you may want to run 'squid -v' to check that your new configure
>> options are compatible with the previous ones.
>>
>> You may also want to keep your old binary around, to be able to roll
>> back in case of problems.
>>
>
> Indeed. There is at least one patch needed to make squid log correctly in
> Debian. http://wiki.squid-cache.org/SquidFaq/CompilingSquid (Debian
> section)
>
> IIRC the packages are built with 4096 fd by default, maybe stable1 missed
> out for some reason. stable8 is available for Debian, please try that
> before going to a custom build.
>
> If you must, using the exact same configure options as your packaged build
> and the logs/log patch leaves "make install" placing all binaries in the
> correct places for a /etc/init.d/restart to work.
>
> Amos
>
>

-- 
Please be using
   Current Stable Squid 2.7.STABLE5 or 3.0.STABLE10
   Current Beta Squid 3.1.0.2