RE: [squid-users] speeding up browsing? any advice?!

hello and thanks for the prompt reply,

sorry for not mentioning earlier, though i continuously check my ISP's PRTG to notice that we have maxed out our allowed bandwidth.
which is a waste since we only browse specific sites that load specific static images that may or may not change in none less than a weekly period..
given that fact, squid would pretty much help me speed up browsing sessions (static images being loaded locally) as well as keeping bandwidth for other traffic that desperately needs it..

----------------------------------------
> Date: Mon, 11 May 2009 12:13:38 +1200
> From: squid3_at_treenet.co.nz
> To: gavin.mccullagh_at_gcd.ie
> CC: squid-users_at_squid-cache.org
> Subject: Re: [squid-users] speeding up browsing? any advice?!
>
>> Hi,
>>
>> On Sun, 10 May 2009, Roland Roland wrote:
>>
>>> users on my network have been complaining of slow browsing sessions for
>>> a
>>> while now..
>>> i'm trying to figure out ways to speed sessions up without necessarily
>>> upgrading my current bandwidth plan...
>>
>> Squid may help with this. However, you don't seem to say that you have
>> determined the cause of the slowness yet. One potential reason is your
>> users are saturating the available bandwidth. Another however, is that
>> you
>> have loss on a link somewhere. Another might be your ISP over-contending
>> you or not giving you the bandwidth you expect. Another might be slow
>> DNS.
>>
>> Squid might indeed help in any or all of these situations. However, I'd
>> be
>> inclined to monitor the edge router device with MRTG or similar and track
>> exactly how much bandwidth is being used. Also, I'd run smokeping across
>> the link to some upstream sites and see have you any packet loss. If you
>> know the cause, you'll be better able to address the problem.
>>
>>> though one more question if possible, is there anything i could
>>> possibly do to speed up browsing aside what i mentioned earlier?
>>>
>>> keep in mind that i only added an allow ACL to my subnet... and that's
>>> it! is it enough?
>>
>> For a start, you may want to look at increasing the cache_dir size. The
>> default is 1GB which is pretty small.
>
> 1GB? only on the newest squid. The slightly older ones more commonly used
> have a measly 100MB.
>
> Also update the dir type. teh default is ufs since thats the only portable
> optimal types.
>
> Linux gets quite a boost from changing to aufs.
> FreeBSD and children get a big boost from changing to diskd.
>
> On Squid-2 COSS is worth a try as a second dir for smaller objects.
>
>> The larger your cache, the larger
>> (albeit decreasingly) your hit rate will be. Once you have a large cache,
>> you probably want to increase maximum_object_size. If you want to save
>> bandwidth "Heap LFUDA" may be the best cache removal policy, as opposed to
>> LRU. There might also be some sense in looking at delay pools to better
>> prioritise the bandwidth given to individual users.
>>
>> Optimising squid's caching can be a big complicated job.
>>
>
> ... but taken step-by-step as an ongoing maintenance process its worth it ;)
>
> Amos
>
>

_________________________________________________________________
Drag n� drop�Get easy photo sharing with Windows Live� Photos.

http://www.microsoft.com/windows/windowslive/products/photos.aspx
Received on Mon May 11 2009 - 05:06:20 MDT