Re: [squid-users] Re: Adaptation::AllRules() after squid -k reconfigure

Hi, Amos

>> For example, if we do "squid -k reconfigure" in above adaptation
>> configuration,
>>
>> - The length of "*Adaptation::AllRules().items[0].acl" acl_access
>> list becomes twice. The old list could not be cleared...
>>
>> - There is mismatches between
>> print Adaptation::AllRules().items[0].acl.cfgline and
>> print Adaptation::AllRules().items[0].acl.aclList._acl.cfgline
>> I don't know why. The Adaptation::AllRules() list could be broken...
>
> Looks like another aspect related to referencing of adaptation configuration
> http://bugs.squid-cache.org/show_bug.cgi?id=2697

The former problem could be OK. but I don't know about the latter one.
I'd like to try the next release !

Sincerely,

--
Mikio Kishi
On Sun, May 2, 2010 at 12:01 PM, Amos Jeffries <squid3_at_treenet.co.nz> wrote:
> Mikio Kishi wrote:
>>
>> Hi,
>>
>>> I think that Adaptation::AllRules() config data is broken after
>>> squid -k reconfigure.
>>> Please check it !
>>>
>>> Squid version: 3.1.1
>>
>> I think that there are two problems.
>>
>>> acl aclA src XXX.XXX.XXX.XXX/32
>>> acl aclB src YYY.YYY.YYY.YYY/32
>>> acl aclC src ZZZ.ZZZ.ZZZ.ZZZ/32
>>> icap_service icapA reqmod_precache �bypass=1 icap://127.0.0.1:XXXX/reqmod
>>> icap_service icapB respmod_precache bypass=1
>>> icap://127.0.0.1:XXXX/respmod
>>> adaptation_service_set req icapA
>>> adaptation_service_set resp icapB
>>> adaptation_access req allow aclA
>>> adaptation_access req allow aclB
>>> adaptation_access req allow aclC
>>> adaptation_access resp allow aclA
>>> adaptation_access resp allow aclB
>>> adaptation_access resp allow aclC
>>
>> For example, if we do "squid -k reconfigure" in above adaptation
>> configuration,
>>
>>  - The length of "*Adaptation::AllRules().items[0].acl" acl_access
>>   list becomes twice. The old list could not be cleared...
>>
>>  - There is mismatches between
>>   print Adaptation::AllRules().items[0].acl.cfgline and
>>   print Adaptation::AllRules().items[0].acl.aclList._acl.cfgline
>>   I don't know why. The Adaptation::AllRules() list could be broken...
>>
>> What do you think ?
>>
>
> Looks like another aspect related to referencing of adaptation configuration
> http://bugs.squid-cache.org/show_bug.cgi?id=2697
>
>
> Amos
> --
> Please be using
> �Current Stable Squid 2.7.STABLE9 or 3.1.1
>