Hi, Amos
When will the fix be released ? Please tell me.
Sincerely,
-- Mikio Kishi On Sun, May 2, 2010 at 3:14 PM, Mikio Kishi <mkishi_at_104.net> wrote: > Hi, Amos > >>> For example, if we do "squid -k reconfigure" in above adaptation >>> configuration, >>> >>> �- The length of "*Adaptation::AllRules().items[0].acl" acl_access >>> � list becomes twice. The old list could not be cleared... >>> >>> �- There is mismatches between >>> � print Adaptation::AllRules().items[0].acl.cfgline and >>> � print Adaptation::AllRules().items[0].acl.aclList._acl.cfgline >>> � I don't know why. The Adaptation::AllRules() list could be broken... >> >> Looks like another aspect related to referencing of adaptation configuration >> http://bugs.squid-cache.org/show_bug.cgi?id=2697 > > The former problem could be OK. but I don't know about the latter one. > I'd like to try the next release ! > > Sincerely, > > -- > Mikio Kishi > > > On Sun, May 2, 2010 at 12:01 PM, Amos Jeffries <squid3_at_treenet.co.nz> wrote: >> Mikio Kishi wrote: >>> >>> Hi, >>> >>>> I think that Adaptation::AllRules() config data is broken after >>>> squid -k reconfigure. >>>> Please check it ! >>>> >>>> Squid version: 3.1.1 >>> >>> I think that there are two problems. >>> >>>> acl aclA src XXX.XXX.XXX.XXX/32 >>>> acl aclB src YYY.YYY.YYY.YYY/32 >>>> acl aclC src ZZZ.ZZZ.ZZZ.ZZZ/32 >>>> icap_service icapA reqmod_precache �bypass=1 icap://127.0.0.1:XXXX/reqmod >>>> icap_service icapB respmod_precache bypass=1 >>>> icap://127.0.0.1:XXXX/respmod >>>> adaptation_service_set req icapA >>>> adaptation_service_set resp icapB >>>> adaptation_access req allow aclA >>>> adaptation_access req allow aclB >>>> adaptation_access req allow aclC >>>> adaptation_access resp allow aclA >>>> adaptation_access resp allow aclB >>>> adaptation_access resp allow aclC >>> >>> For example, if we do "squid -k reconfigure" in above adaptation >>> configuration, >>> >>> �- The length of "*Adaptation::AllRules().items[0].acl" acl_access >>> � list becomes twice. The old list could not be cleared... >>> >>> �- There is mismatches between >>> � print Adaptation::AllRules().items[0].acl.cfgline and >>> � print Adaptation::AllRules().items[0].acl.aclList._acl.cfgline >>> � I don't know why. The Adaptation::AllRules() list could be broken... >>> >>> What do you think ? >>> >> >> Looks like another aspect related to referencing of adaptation configuration >> http://bugs.squid-cache.org/show_bug.cgi?id=2697 >> >> >> Amos >> -- >> Please be using >> �Current Stable Squid 2.7.STABLE9 or 3.1.1 >> >Received on Sun Jun 06 2010 - 17:34:48 MDT
This archive was generated by hypermail 2.2.0 : Mon Jun 07 2010 - 12:00:03 MDT